PLA+ Magenta CMYK Filament Hueforge 1.75mm 1Kg eSun

PLA+ CMYK from eSun is made for Hueforge. The software turns an image into a flat relief of thin colour layers; with the four colours cyan, magenta, yellow and white this produces colour pictures and lithophanes that look especially good against the light. The four colours are matched to each other so the layers blend cleanly. The filament is a PLA+ and as easy to print as standard PLA. The spool holds 1 kg of 1.75 mm filament in the colour Magenta. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

All four colours are also available as a set: PLA+ CMYK Filament Hueforge Kit 1.75mm 4x1Kg eSun

More colours PLA+ CMYK:
       

Recommended Accessories:

• Filament dryers (dry box): all models in our shop
• Filament Vacuum Set Pro 3 eVacuum by eSun
• 5 Pcs. Filament Vacuum Bags Pro 3 from eSun
• 1 Liter Isopropyl Alcohol/Isopropanol 99.8%
• 3DLac Adhesive Spray 400ml

Features:

• One of the four base colours cyan, magenta, yellow and white for Hueforge
• PLA+: tough, hard to break and easy to print
• Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
• Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
• Vacuum-packed with desiccant

Application Examples:

• Colour pictures and portraits with Hueforge
• Lithophanes
• Signs, logos and decoration

Documentation:

• PLA+ technical data sheet (PDF)
• PLA+ safety data sheet (PDF)
• Hueforge software

Recommended Print Settings:

• Nozzle temperature: 220 °C (210 to 230 °C)
• Print bed temperature: 55 °C (45 to 60 °C)
• Part cooling fan: 100 %
• Print speed: 70 mm/s (40 to 100 mm/s)

Technical Data:

• Manufacturer: eSun
• Material: PLA+
• Colour: Magenta
• Filament diameter: 1.75 mm
• Tolerance: ±0.05 mm
• Filament weight: 1 kg
• Density: 1.23 g/cm³
• Melt flow index: 5 g/10 min (190 °C / 2.16 kg)
• Heat deflection temperature: 53 °C
• Tensile strength: 63 MPa
• Elongation at break: 20 %
• Flexural strength: 74 MPa
• Flexural modulus: 1973 MPa
• Izod impact strength: 9 kJ/m²
• Spool: cardboard
• Spool outer diameter: 200 mm
• Spool hole diameter: 55 mm
• Spool width: 62 mm
• Gross weight: 1303 g

Scope of Delivery:

• 1× PLA+ CMYK filament Magenta, 1.75 mm, 1 kg on cardboard spool