PLA Basic Green Refill Filament 1.75mm 1Kg eSun

Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally friendly, and compatible with your existing setup? Then the PLA Basic Refill Filament from eSun is just right for you. This refill is identical to the proven PLA Basic - just without a disposable spool. Instead, you use the reusable eSpool+, which can be purchased separately. The filament can be easily mounted onto the eSpool+, which not only avoids waste but also simplifies your storage. Moreover, it is 1:1 compatible with Bambulab's refill systems, providing you with maximum flexibility. With its clean processing, constant diameter tolerance, and excellent printing properties, this PLA is ideal for both beginners and professionals. The smooth white surface ensures a high-quality finish on every project. Whether functional prototypes or decorative objects - this material consistently delivers good results. Thanks to its biological origin (cornstarch), PLA Basic is also an environmentally conscious choice.

Recommended Accessories:

eSpool+ Removable Spool for Refill Filament eSun

Properties:

Affordable with excellent value for money.
High-speed printing up to 300mm/s with top quality.
Suitable for high-end and standard printers.
Vacuum-sealed packaging with desiccant
Sustainable refill concept: This filament comes without a traditional disposable spool and can be easily mounted on the separately available eSpool+.
Perfect compatibility: The refill is fully compatible with the Bambulab refill system, allowing you to continue using existing hardware.
Excellent print quality: Consistent diameter tolerance and high roundness result in consistently smooth print results without clogs.
High environmental friendliness: PLA is based on biodegradable raw materials such as cornstarch, making it particularly eco-friendly.
Pleasant printing behavior: The material hardly warps and can be reliably processed even without a heated print bed.

Recommended Printing Parameters:

Printing Temperature: 210-230°C Recommended: 215°C
Heated Bed Temperature: 45-60°C Recommended: 55°C
Fan Speed: 100%
Feed Rate: 40-300mm/s (2400-18000mm/min)

Download:

PLA Basic Datasheet

Technical Data:

Manufacturer: eSun
Manufacturer SKU: PLA-Basic175G1R1
Color: Green
Compatibility: eSpool+ System from eSun (separately available), Bambulab AMS Refill compatible
Weight: 1kg
Diameter: 1.75mm
Tolerance: +-0.05mm
Density: 1.24 g/cm³
Heat Deflection Temperature: 50-60°C (0.45 MPa)
Melt Flow Index: 3.5-4.5 g/10min (190°C/2.16kg)
Tensile Strength: 20-30 MPa
Elongation at Break: 5-10%
Flexural Strength: 101.2 MPa
Flexural Modulus: 3111.8 MPa
Impact Strength: 3.09 kJ/m²
Recommended Printing Temperature: 210-230°C (Optimal: 215°C)
Recommended Heated Bed Temperature: 45-60°C
Gross Weight: 1300g
Dimensions: 175 x 175 x 59mm