LM2596 DC-DC Step-Down Converter Module with Display

The LM2596 is an adjustable voltage regulator that generates a lower output voltage from a higher input voltage. The input voltage should always be about 3 V above the desired output voltage. The output voltage is set via the potentiometer, and the LED display shows either the input or the output voltage. The button on the board switches between them.

Info: A precision potentiometer is fitted on the module. It can take 5 to 10 turns to set the voltage.

Recommended alternative without display: LM2596 Switching Regulator DC-DC Step-Down (Buck Converter)

Recommended Accessories:

• Stranded Wire 0.5mm² 20AWG Black Halogen-free
• Stranded Wire 0.5mm² 20AWG red halogen-free

Features:

• 3-digit LED display for input or output voltage
• IN and OUT LEDs show the selected measurement
• Thermal shutdown function
• Reverse polarity protection
• Screw terminals for input and output

Application Examples:

• Powering microcontrollers and modules from 12 V or 24 V
• Adjustable voltage source for test setups
• Adapting the power supply with visible voltage

Documentation:

• LM2596 product page TI

Technical Data:

• Type: LM2596 DC-DC Step-Down
• Input voltage: 4.5 V to 35 V DC
• Output voltage: 1.25 V to approx. 32 V adjustable
• Rated current: 2 A (3 A max.)
• Efficiency: up to 90 %
• Operating temperature: -40 °C to +85 °C
• Electrolytic capacitors: 220 µF 35 V (marking)
• Connections: VIN+, VIN-, VOUT+, VOUT-
• Mounting holes: 4× diameter 3.2 mm
• Dimensions: 66 × 36 × 14 mm
• Weight: 22 g

Scope of Delivery:

• 1× LM2596 DC-DC step-down converter module with display