LiPo Battery 1500mAh JST 2.0 / Lithium Ion Polymer

This lithium-polymer battery type 504050 provides 1500 mAh at a nominal voltage of 3.7 V and is equipped with an integrated protection circuit (PCM) against overcharge, deep discharge, overcurrent, and short circuit. It can be directly connected to development boards and charging modules via the JST-PH 2.0 connector. This makes the battery ideal for battery-powered projects with Arduino, ESP32, LoRa, and Raspberry Pi Pico. Always compare the polarity of the connector with the target board before the first connection – the pin assignment is not the same for all manufacturers.

Properties:

Integrated protection circuit (PCM) against overcharge, deep discharge, overcurrent, and short circuit
Capacity of 1500 mAh in compact pouch construction
JST-PH 2.0 connector for direct connection to boards and charging modules
Flat construction for space-saving installation in housings and DIY projects

Application Examples:

Power supply for ESP32 and Arduino projects with LiPo charging electronics
Mobile operation of weather stations and sensor nodes
Buffer battery for boards with integrated charge management
Energy source for solar projects with MPPT charge controller
Battery for portable DIY projects with tight space budget

Technical Data:

Manufacturer: Joy
Manufacturer SKU: 504050
Cell type: Lithium-polymer (LiPo), type 504050
Nominal voltage: 3.7 V
Rated capacity: 1500 mAh
End-of-charge voltage: 4.2 V
End-of-discharge voltage: 2.45 V
Max. charge/discharge current: 1.5 A (1C)
Protection circuit: integrated (overcharge 4.25 V, deep discharge 2.45 V, overcurrent, short circuit)
Cycling lifetime: ≥500 cycles
Connector: JST-PH 2.0
Cable length: 45mm
Certification: IEC 62133-2, UN 38.3
Dimensions: 4,9 × 39,6 × 51,9 mm
Weight: 21 g

Scope of Delivery:

1× LiPo battery 1500mAh with JST-PH 2.0 connector

Safety and Disposal Instructions

Charge only with a suitable charger. Do not short-circuit, open, damage, or heat the battery above 60°C. Keep out of reach of children. Do not use if damaged or deformed.

Disposal: Batteries and accumulators do not belong in household waste. Free return at us or any point of sale – for details see Return & Disposal.