JST SH1.25 Lipo Connection Cable 10cm with Plug

This connection cable connects boards with a 2-pin SH1.25 socket (1.25 mm pitch), for example the Heltec WIFI LoRa 32, to a LiPo battery or another voltage source. The cable ends are stripped and tinned and are soldered on.

Important: The white housing on the cable plugs into the SH1.25 socket on the board. The housing itself contains socket contacts, which is why some manufacturers also call it a socket. It does not fit a battery plug of the same type. Check the polarity before connecting, it is not uniform with this type. The battery is not included.

For custom cable lengths: JST 1.25mm Crimp Connector and Socket Set, 60 pieces


Features:

  • SH1.25 housing with 2 socket contacts on the cable side
  • Fits the 2-pin SH1.25 socket on the board
  • Other side stripped and tinned for soldering
  • Designation SH1.25 as used by Heltec, not to be confused with the JST SH series with 1 mm pitch

Application Examples:

  • Connecting a board with an SH1.25 socket to a LiPo battery with solder connection
  • Power supply via the SH1.25 socket of a board

Technical Data:

  • Manufacturer: Lilygo
  • Manufacturer SKU: P332
  • Type: SH1.25, 2-pin
  • Pitch: 1.25 mm
  • Length: 10 cm
  • Cross section: 29 AWG
  • Colours: red, black
  • Connection: housing with socket contacts / solder end
  • Weight: 0.5 g

Scope of Delivery:

  • 1× JST SH1.25 Lipo connection cable 10cm with plug

Write a review

Note: HTML is not translated!
    Bad           Good

JST SH1.25 Lipo Connection Cable 10cm with Plug

  • Brand: Lilygo
  • Product Code: 420655
  • Availability: In Stock
  • CHF0.80

  • Ex Tax: CHF0.74

Related Products

JST 2.0 Lipo Connection Cable 15cm with Plug

JST 2.0 Lipo Connection Cable 15cm with Plug

This connection cable connects boards with a 2-pin JST-PH socket (2 mm pitch) to a LiPo battery or a..

CHF0.80 Ex Tax: CHF0.74

CubeCell GPS-6502 868MHz Lora Node HTCC-AB02S

CubeCell GPS-6502 868MHz Lora Node HTCC-AB02S

The Heltec CubeCell GPS-6502 HTCC-AB02S is a LoRaWAN board with an Air530 GPS receiver and OLED disp..

CHF34.90 Ex Tax: CHF32.28

JST 1.25mm Crimp Connector and Socket Set, 60 pieces

JST 1.25mm Crimp Connector and Socket Set, 60 pieces

This set contains connectors with 1.25 mm pitch in 2, 3, 4 and 5 poles. The crimp contacts are inclu..

CHF18.90 Ex Tax: CHF17.48

CubeCell 868MHz Lora Dev-Board V2

CubeCell 868MHz Lora Dev-Board V2

The Heltec CubeCell Dev-Board V2 (HTCC-AB01 V2) is an Arduino-compatible LoRa board with the ASR6502..

CHF21.90 Ex Tax: CHF20.26

Heltec WiFi LoRa 32 V3 SX1262 868MHz with OLED

Heltec WiFi LoRa 32 V3 SX1262 868MHz with OLED

The Heltec WiFi LoRa 32 V3 is a development board with the ESP32-S3FN8 (Wi-Fi, Bluetooth LE, 8 MB fl..

CHF24.90 Ex Tax: CHF23.03

Tags: 1.25mm, SH1.25, JST, connector, crimp, nylon, PHR-1.25, PH, PH1.25, JST1.25, Lipo, connection, cable, 29AWG, micro, microconnector, Heltec, SH1.25-2