CubeCell 868MHz Lora Dev-Board V2

This is the new version of the popular HTCC-AB01 CubeCell ASR6502 Lora Dev-Board from Heltec. The module retains the pin assignment and functionalities as the previous version. The CubeCell Lora Dev-Board has an ASR6502 of the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and an integrated SX1262 Lorachip. Otherwise, it is still the affordable, Arduino compatible LoRa Dev Board. Perfect for beginners as well as advanced developers. 

Before you can begin, of course, you need to check whether you have a TTN (The Things Network) gateway in your area. You can find all TTN gateways on the following map:

• https://www.thethingsnetwork.org/map

Alternatively, you can of course also install a multi-channel gateway for the TTN yourself (The Things Network):

• LoRaWAN Gateway

Recommended accessories:

• LiPo Battery 1000mAh JST 1.25 / Lithium Ion Polymer for LoRa TTGO
• Solar cell 5V 200mA 1W 110x60mm
  

Features:

• Arduino compatible 
• Perfect for beginners and advanced developers, with the board you can easily and cheaply implement your LoRa IoT projects 
• CE and FCC certification 
• Based on ASR6052 is a PSoC® chip of the 4000 series MCU (ARM® Cortex® M0+ Core) and has an integrated SX1262 
• Supports LoRaWAN 4.4.1 
• Onboard solar energy management system, the board can be directly connected to a 5.5 to 7V solar module 
• Onboard SH1.25-2 battery interface, integrated lithium battery management system with charging and discharging management, overcharge protection, battery status detection, automatic switching USB / battery operation 
• USB-C  interface with complete ESD protection, short circuit protection, RF shielding 
• Integrated CP2102 USB-to-serial port chip, suitable for downloading programs and debugging

Download and Links:

• Datasheet and Schemas
• Github CubeCell
• Pin Out Diagram

Pinout HTCC-AB01 CubeCell 868MHz Lora Dev-Board V2:

Technical Details:

• Manufacturer: Heltec Automation  
• Microprocessor: ASR6502 (48 MHz ARM Cortex M0+ MCU) 
• LoRa Transceiver: SX1262 
• LoRa working band: 868MHz EU_863_870 
• LoRa maximum output power 22 ± 1dB 
• Hardware Resources UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3 
• 12 - Bit ADC; 8 - Channel DMA 
• 6 x GPIO 
• FLASH: 128KB internal 
• Interface: Micro USB and LoRa (IPEX) 
• USB-UART Chip: CP2102 
• Battery detection circuit 
• Battery connection: 3.7V Lithium SH1,25 2pin 
• Switchable power supply for external sensors via Vext: 3.3V max 350mA 
• Power consumption:
• LoRa Rx Mode: 10mA
• LoRa 10dBm Output: 70mA
• LoRa 14dBm Output: 90mA
• LoRa 17dBm Output: 100mA
• LoRa 20dBm Output: 105mA
• Sleep mode Deep Sleep (USB-powered): 9.6mA
• Sleep mode Deep Sleep (VBAT/Battery operation): 11uA
• Sleep mode Deep Sleep (3.3V powered): 3.5uA
• Dimensions: 42 x 23 x 8mm 
• Weight: 25g

Delivery content:

• 1x CubeCell 868MHz Lora Dev-Board V2 
• 1x External LoRa Antenna with IPEX connection cable 
• 2x 11pin pin header 
• 1x LiPo connection cable