CubeCell GPS-6502 868MHz Lora Node HTCC-AB02S

The CubeCell Lora GPS-6502 HTCC-AB02S with Oled Display and GPS from Heltec is a cost-effective LoRaWan Board, that is perfect for your own Lora Node Applications. The CubeCell GPS Board features an ASR6501 of the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262 integrated. Additionally, this board features an AIR530 GPS receiver module, capable of evaluating up to 6 satellites at once. This ensures an improved accuracy in position determination of up to 2.5m. The board is compatible with Arduino and with the detailed instructions by Heltec, it can be easily integrated and programmed into the Arduino IDE. The CubeCell LoRaWan Development board also has an Ultra Low Power design and consumes only 56uA of power in Deep Sleep Mode (when battery operated). The board also features an onboard solar power management system, making it possible to solder solar cells (5.5 to 7V) for charging the optional LiPo Lithium battery directly on the board. The battery condition can be easily queried via the analog input of the microcontroller. Thus, you can build a 100% autonomous LoRaWan Node that is operated with solar power.

Before you can get started, you will need to check if you have a TTN (The Things Network) Gateway nearby. You can find all TTN Gateways on the following map:
https://www.thethingsnetwork.org/map

Otherwise, you can also install a Multi-Channel Gateway for the TTN yourself (The Things Network):

• LoRaWAN Gateway

Recommended Accessories:

• LiPo Battery 1000mAh JST 1.25 / Lithium Ion Polymer for LoRa TTGO
• Solar Cell 6V 165mA 1W

Features:

• Integrated 0.96 inch OLED display with 128x64 pixel resolution, which can be used to display debugging information, battery power and other information.
• AIR530 GPS receiver module with onboard antenna
  
• Arduino compatible
• Perfect for beginners and advanced developers
• With the board, you can easily and affordably implement your LoRa IoT projects.
• CE and FCC certification
• Based on ASR6051, a PSoC® chip of the 4000 series MCU (ARM® Cortex® M0+ Core) and has an integrated SX1262.
• Supports LoRaWAN 4.4.1
• Extremely power-saving design with only 11uA (with Lithium battery) in Deep Sleep mode.
• Onboard RGB LED perfectly suitable for debugging or displaying states.
• Onboard solar power management system: The board can be directly connected to a 5.5 to 7V solar module.
• Onboard SH1.25-2 battery interface, integrated lithium battery management system with charging and discharging management, overcharge protection, battery condition detection, automatic switch USB / battery operation
• Micro USB interface with complete ESD protection, short circuit protection, RF shielding
• Integrated CP2102 USB-to-Serial port chip: Suitable for downloading programs and debugging.

Download and Links:

• Arduino Installation Guide
• Github CubeCell
• Pin Out Diagram

Pinout HTCC-AB02S CubeCell GPS-6502 

Technical Details:

• Type: CubeCell HTCC-AB02S
• GPS: AIR530
• AIR530 does not have a buffer battery, positions are only stored in battery operation.
• Microprocessor: ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM)
• Oled Color: White
• Oled Resolution: 128x64
• LoRa Chip: ASR6502 (Internal Semtech® LoRa® Transceiver SX1262)
• LoRa Working band: 868MHz EU_863_870
• LoRa maximum output power 22 ± 1dB
• Hardware Resources UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
• 12 - Bit ADC; 8 - Channel DMA
• 6 x GPIO
• FLASH: 128KB internal
• Interface: Micro USB and LoRa (IPEX)
• USB-UART Chip: CP2102
• Battery detection circuit
• Battery Connection: 3.7V Lithium SH1.25 2pin
• Switchable power supply for external sensors via Vext: 3.3V max 350mA
• Power consumption:
• LoRa Rx Mode: 10mA
• LoRa 10dBm Output: 70mA
• LoRa 14dBm Output: 90mA
• LoRa 17dBm Output: 100mA
• LoRa 20dBm Output: 105mA
• Sleep mode Deep Sleep (USB powered): 9.6mA
• Sleep mode Deep Sleep (VBAT/Battery operation): 56uA
• Sleep mode Deep Sleep (3.3V supplied): 50uA
• Dimension: 55.9 x 27.9 x 9.5 mm
• Weight: 24g

Package Contents:

• 1x CubeCell GPS-6502 868MHz Lora Node HTCC-AB02S
• 1x External Antenna 868MHz
• 2x Pin Headers 18x1p