Gravity Digital Peristaltic Pump / Hose Pump

The peristaltic pump from DFRobot has a built-in motor driver that expects a control signal like a servo. Direction and speed can thus be controlled with Arduino, Raspberry Pi or micro:bit. Three rollers squeeze the tube and so deliver small amounts of liquid precisely, for example for hydroponics, drip irrigation or experiments.

Note: The motor needs about 5 W, while USB provides only about 2.5 W. Therefore power the microcontroller with an external power supply.

Note: The connection cable can be converted to male pins with a Dupont cable M-M, so that it also fits an Arduino UNO.


Recommended Accessories:


Features:

  • Motor driver built onto the pump motor
  • Control like a 360° servo via a PWM signal
  • Forward, stop and reverse via the pulse width
  • 3 rollers, low pulsation
  • Quiet operation
  • Calibrate before use: fill a container and measure the time

Application Examples:

  • Dosing liquids
  • Hydroponics and drip irrigation
  • Experiments in the laboratory and at school
  • Fertiliser for aquariums

Documentation:


Technical Data:

  • Driver input voltage: 5 V to 6 V
  • Driver continuous current: max. 1.8 A
  • Driver peak current: 2.5 A
  • Driver quiescent current: < 1 mA without control signal
  • Control signal: pulse width 500 µs to 2500 µs, resolution 1 µs, 50 Hz
  • Forward: 500 µs to 1400 µs (500 µs = fastest speed)
  • Stop: 1400 µs to 1600 µs
  • Reverse: 1600 µs to 2500 µs (2500 µs = fastest speed)
  • Connector: Gravity PH2.0-3P
  • Driver size: 27.4 × 28.7 mm
  • Motor: DC motor, 6 V, 5 W
  • Tube: BPT, inner 2.5 mm, outer 4.5 mm
  • Flow rate: ≥ 45 ml/min
  • Environment: 0 °C to 40 °C, relative humidity < 80 %
  • Weight: 173 g

Scope of Delivery:

  • 1× Gravity digital peristaltic pump with motor driver
  • 1× Gravity sensor cable 3-pin PH2.0 to XH2.54
  • 1× Silicone tube 1 m
  • 1× Plastic measuring cylinder 10 ml

Write a review

Note: HTML is not translated!
    Bad           Good

Gravity Digital Peristaltic Pump / Hose Pump

  • Brand: DFRobot
  • Product Code: 420849
  • Availability: In Stock
  • CHF29.90

  • Ex Tax: CHF27.66

Related Products

DC Socket Female Barrel Jack 5.5mm / 2.1mm with Screw Terminals

DC Socket Female Barrel Jack 5.5mm / 2.1mm with Screw Terminals

This DC socket is suitable for extending cables and lines and for connecting a power supply with a 5..

CHF1.90 Ex Tax: CHF1.76

Dupont Cables M-M 10cm 20 Pieces

Dupont Cables M-M 10cm 20 Pieces

Dupont cables are used to connect components quickly. They are also known as jumper cables, test cab..

CHF1.90 Ex Tax: CHF1.76

Gravity Flow Sensor 1/8 Inch

Gravity Flow Sensor 1/8 Inch

The Gravity flow sensor from DFRobot measures how much water flows through a thin hose with a 1/8 in..

CHF9.90 Ex Tax: CHF9.16

Water Pump JT-280AT 280-600L/h 6-18V

Water Pump JT-280AT 280-600L/h 6-18V

This DFRobot submersible pump delivers 280 to 600 L/h. It is suitable for watering plants, for fount..

CHF16.90 Ex Tax: CHF15.63

Micro Water Pump 120L/h 2.5-6V

Micro Water Pump 120L/h 2.5-6V

This small submersible pump for 2.5 V to 6 V is suitable for building an irrigation system for potte..

CHF7.90 Ex Tax: CHF7.31

M5Stack Irrigation Unit with Soil Moisture Sensor and Pump

M5Stack Irrigation Unit with Soil Moisture Sensor and Pump

The Watering Unit from M5Stack measures soil moisture with a capacitive sensor and has a built-in wa..

CHF14.90 Ex Tax: CHF13.78

Water pump JT-180 100-350L/h 4.5-12V

Water pump JT-180 100-350L/h 4.5-12V

This DFRobot JT-180 submersible pump delivers 100 to 350 L/h at 4.5 to 12 V DC. It is suited for wat..

CHF15.90 Ex Tax: CHF14.71

Micro Water Pump Horizontal 100L/h 3-6V with Hose

Micro Water Pump Horizontal 100L/h 3-6V with Hose

This small DFRobot pump delivers about 80 to 100 l/h at 3 to 6 V. It is waterproof to IP68 and can b..

CHF8.90 Ex Tax: CHF8.23

Tags: Peristaltic pump, Hose pump, Dosing pump, Dosing, Liquids, Motor, PWM, Servo, Dosage, Pump, Digital, Peristaltic, Pump, Digital, DFR0523, DFRobot, Gravity