PLA+HS Beige High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Beige. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.

More colours PLA+HS:
                                                               


Recommended Accessories:


Features:

  • Made for fast printing: up to 350 mm/s, a speed rarely used in practice
  • Flows more easily than standard PLA+ at high speed
  • Good layer adhesion even at high speed, according to eSun
  • Tough, does not break easily according to eSun
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Enclosures and mounts for electronics
  • Several identical parts where print time matters
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 350 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+HS (PLA+ for high print speed)
  • Colour: Beige
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 54 °C (0.45 MPa)
  • Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
  • Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
  • Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
  • Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
  • Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
  • Acid and alkali resistant: no
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+HS filament Beige, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+HS Beige High Speed Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 423218
  • Availability: Out Of Stock
  • CHF16.90

  • Ex Tax: CHF15.63

Related Products

PLA+ Beige Filament 1.75mm 1Kg eSun

PLA+ Beige Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Light Brown Filament 1.75mm 1Kg eSun

PLA+ Light Brown Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Matte Light Khaki Filament 1.75mm 1Kg eSun

PLA Matte Light Khaki Filament 1.75mm 1Kg eSun

The ePLA-Matte Light Khaki is a PLA-based filament from eSun. The ePla-Matte Series from eSun combin..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Light Brown High Speed Filament 1.75mm 1Kg eSun

PLA+HS Light Brown High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA Hyper Beige Filament 1.75mm 1Kg Creality

PLA Hyper Beige Filament 1.75mm 1Kg Creality

The Creality PLA Hyper Filament enables ultra-fast printing speeds of up to 600 mm/s, significantly ..

CHF20.90 Ex Tax: CHF19.33

PLA Hyper Peach Fuzz Filament 1.75mm 1Kg Creality

PLA Hyper Peach Fuzz Filament 1.75mm 1Kg Creality

The Creality PLA Hyper filament allows you ultra-fast printing speeds of up to 600 mm/s, significant..

CHF20.90 Ex Tax: CHF19.33

PLA+ Light Khaki Filament 1.75mm 1Kg eSun

PLA+ Light Khaki Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Hyper RFID Beige Filament 1.75mm 1Kg Creality

PLA Hyper RFID Beige Filament 1.75mm 1Kg Creality

With the PLA Hyper RFID filament from Creality, you experience 3D printing in a new dimension. This ..

CHF22.90 Ex Tax: CHF21.18

PLA Hyper RFID Peach Filament 1.75mm 1Kg Creality

PLA Hyper RFID Peach Filament 1.75mm 1Kg Creality

With the PLA Hyper RFID Filament from Creality, you will experience 3D printing in a new dimension. ..

CHF25.90 Ex Tax: CHF23.96

PLA Basic Beige Filament 1.75mm 1Kg eSun

PLA Basic Beige Filament 1.75mm 1Kg eSun

With the PLA Basic Filament from eSun, you get a cost-effective yet high-quality printing material, ..

CHF11.90 Ex Tax: CHF11.01

PLA Basic Beige Refill Filament 1.75mm 1Kg eSun

PLA Basic Beige Refill Filament 1.75mm 1Kg eSun

Are you looking for high-quality filament for your 3D printer that is reliable, eco-friendly, and co..

CHF11.40 Ex Tax: CHF10.55

Panchroma PLA Beige Filament 1.75mm 1Kg

Panchroma PLA Beige Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..

CHF18.90 Ex Tax: CHF17.48

Tags: Esun, ePLA+HS, Speed, affordable, Filament, High, Flow, PLA, 3D printing, printing speed, print quality, melting properties, Rapid, Prototyping, environmentally friendly, 1.75, Printer, 3D Printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, inexpensive, 1.75mm, Beige, brown, skin color.