PLA+HS Light Brown High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Light Brown. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.

More colours PLA+HS:
                                                               

Recommended Accessories:

• Filament dryers (dry box): all models in our shop
• Filament Vacuum Set Pro 3 eVacuum by eSun
• 5 Pcs. Filament Vacuum Bags Pro 3 from eSun
• 1 Liter Isopropyl Alcohol/Isopropanol 99.8%

Features:

• Made for fast printing: up to 350 mm/s, a speed rarely used in practice
• Flows more easily than standard PLA+ at high speed
• Good layer adhesion even at high speed, according to eSun
• Tough, does not break easily according to eSun
• Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
• If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
• Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
• Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
• Vacuum-packed with desiccant

Application Examples:

• Prototypes and functional samples
• Enclosures and mounts for electronics
• Several identical parts where print time matters
• Models, figures and decoration

Documentation:

• Datasheet PLA+HS, version 2.0 (eSun, PDF)
• Safety data sheet PLA+HS (eSun, PDF)

Recommended Print Settings:

• Nozzle temperature: 220 °C (210 to 230 °C)
• Print bed temperature: 55 °C (45 to 60 °C)
• Print bed: PEI
• Part cooling fan: 100 %
• Print speed: slicer's default profile, up to 350 mm/s

Technical Data:

• Manufacturer: eSun
• Material: PLA+HS (PLA+ for high print speed)
• Colour: Light Brown
• Filament diameter: 1.75 mm
• Tolerance: ±0.05 mm
• Filament weight: 1 kg
• Density: 1.24 g/cm³
• Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
• Heat deflection temperature: 54 °C (0.45 MPa)
• Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
• Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
• Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
• Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
• Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
• Acid and alkali resistant: no
• Spool: cardboard
• Spool outer diameter: 200 mm
• Spool hole diameter: 55 mm
• Spool width: 62 mm
• Gross weight: 1303 g

Scope of Delivery:

• 1× PLA+HS filament Light Brown, 1.75 mm, 1 kg on cardboard spool