Universal Raw e-Paper Driver HAT Adapter

This universal Waveshare e-paper driver HAT connects raw e-ink displays (bare e-paper panels without a board) directly to a Raspberry Pi. The included PH2.0 to Dupont cable also allows ESP8266, ESP32 or Arduino to be connected. An Arduino UNO has too little RAM for the e-paper displays, suitable boards are for example Arduino Leonardo, Mega, ESP8266, ESP32 or a Raspberry Pi.

Recommended Accessories:

• 200x200 1.54inch E-Ink Raw Black / White e-Paper Display
• 250x122 2.13inch E-Ink Raw Black / White e-Paper Display
• 296x128 2.9inch E-Ink Raw Black / White e-Paper Display
• 400x300 4.2inch E-Ink Raw Black/White e-Paper Display

Features:

• Plugs directly onto Raspberry Pi 2B, 3B, 3B+, Zero and Zero W
• Compatible with Arduino, ESP32 and ESP8266 via Dupont cables
• On-board level shifter for 3.3 V and 5 V microcontrollers
• Example code for Arduino, STM32 and Raspberry Pi in the Waveshare wiki
• Slide switch position A for 1.54", 2.13" and 2.9" black / white, i.e. 420630, 420631 and 420634
• Slide switch position B for the other panels, for example 4.2" black / white 420637

Application Examples:

• Running e-paper displays on Raspberry Pi, Arduino and ESP
• Displays for weather, calendar and measured values
• Displays that change rarely and stay visible without power

Documentation:

• Waveshare Wiki e-Paper Driver HAT
• GxEPD2 Arduino library (GitHub)

Technical Data:

• Manufacturer: Waveshare
• Manufacturer SKU: 13512
• Operating voltage: 3.3 V to 5 V DC
• Interface: 3-wire SPI, 4-wire SPI (default)
• Mounting holes: 3 mm
• Dimensions: 65 × 30.2 mm
• Weight: 21 g

Scope of Delivery:

• 1× e-Paper Driver HAT
• 1× screw set for Raspberry Pi
• 1× 24-pin FFC cable
• 1× FFC adapter for display
• 1× PH2.0 to Dupont 2.54 mm adapter cable 20 cm
• The e-paper display and the Raspberry Pi in the photos are not included