Universal Raw Driver e-Paper Shield for Arduino / NUCLEO

Practical Universal e-Paper Driver Shield for direct connection of Raw E-Ink Displays to an Arduino or Nucelo Board. With this shield, you can connect our inexpensive Raw e-Paper Displays (e-Paper raw panels without PCB) directly to your Arduino. ePaper Displays are not suitable for use with an Arduino UNO due to insufficient memory. Therefore, we recommend using the shield on an Arduino Leonardo or NUCLEO, XNUCLEO, etc.

Features:

• Compatible with Arduino boards like UNO, Leonardo, NUCLEO, XNUCLEO, XNUCLEO, etc.
• On-board logic level converter for operation with 3.3V and 5V microcontrollers
• Integrated external RAM 1024K bits over SPI
• Micro SD slot, images can be stored on the TF card for display
• Detailed user manual in English available

Documentation:

Wiki: www.waveshare.com/wiki/e-Paper_Shield

Alternative Libraries for Arduino:

GxEPD: https://github.com/ZinggJM/GxEPD

Slide switch trigger state:

Depending on the display, the on-board slide switch must be set correctly.

Position A for the following displays:

• 200x200 1.54inch E-Ink Raw Black / White e-Paper Display Item No.: 420630
• 250x122 2.13inch E-Ink Raw Black / White e-Paper Display Item No.: 420631
• 296x128 2.9inch E-Ink Raw Black / White e-Paper Display Item No.: 420634

Position B for the following display:

• 400x300 4.2inch E-Ink Raw Black / White e-Paper Display Item No.: 420637

Technical details:

• Operating voltage: 3.3VDC / 5VDC
• Interface: 3-wire SPI, 4-wire SPI (standard)
• Dimensions: 53.34 × 53.34mm
• Weight: 29g

Package includes:

• 1x Universal Raw e-Paper Driver Shield for Arduino / NUCLEO
• 1x e-Paper Raw Adapter
• 1x 24PIN FFC Cable

Note: The e-Paper display in the photos is not included in the package