LilyGo TTGO T-Camera ESP32 with 0.96 OLED Normal

The LilyGo T-Camera (version V1.6.2) is an ESP32 board with an OV2640 camera (2 megapixels), a 0.96-inch OLED display, an AS312 PIR motion sensor and an I2S microphone. It can be used for camera projects with motion detection, for example a camera that takes a picture when it detects motion and sends it via Wi-Fi. This version has a standard lens.

LilyGo now lists the T-Camera V1.6.2 as discontinued.

Newer alternative with ESP32-S3: LilyGo T-Camera S3 OV2640 with Case

Features:

• ESP32 with Wi-Fi and Bluetooth, 4 MB flash, 8 MB PSRAM
• OV2640 camera with 2 megapixels
• 0.96-inch OLED display, SSD1306, 128 × 64 pixels, I2C
• AS312 PIR motion sensor on GPIO19; the pin is not an RTC pin, so the PIR does not wake the board from deep sleep (LilyGo)
• I2S microphone
• Button on GPIO15
• CH9102F USB-serial converter, IP5306 charging chip with JST 1.25 mm connector for a battery (battery not included)

Application Examples:

• Camera that takes a picture when motion is detected
• Surveillance camera in your own Wi-Fi network
• Projects with image, sound and display on one board
• Integration into Home Assistant with ESPHome

Documentation:

• T-Camera on GitHub (LilyGo, English)
• ESPHome documentation: ESP32 Camera Component

Technical Data:

• Manufacturer: LilyGo
• Manufacturer SKU: Q123
• Version: T-Camera V1.6.2
• Microcontroller: ESP32
• Flash: 4 MB
• PSRAM: 8 MB
• Camera: OV2640, 2 megapixels
• Lens: standard
• Display: OLED 0.96 inch, SSD1306, 128 × 64 pixels
• I2C: SDA GPIO21, SCL GPIO22
• PIR: AS312 on GPIO19
• Microphone: I2S, SCK GPIO26, WS GPIO32, data GPIO33
• Button: GPIO15
• USB-serial converter: CH9102F
• Charging chip: IP5306
• Dimensions: 68 × 28 × 18 mm
• Weight: 32 g

Scope of Delivery:

• 1× LilyGo TTGO T-Camera ESP32 with 0.96 OLED Normal
• 1× JST 1.25 mm connection cable