eResin-PLA Pro Black 0.5Kg UV 405nm eSun

eResin-PLA Pro Black is a PLA polyol synthesized UV-Resin from eSun. The resin is made from organic compounds like PLA, making it very odor neutral compared to traditional resin. The eResin-PLA Pro impresses with its high strength, resolution and excellent price-performance ratio. The resin is compatible with mono and multicolor displays and is suitable for small filigree, as well as larger models equally. With its top price-performance ratio and neutral odor, we recommend the eResin-PLA Pro as the perfect beginner's resin, or as the affordable all-rounder for experienced resin printing. eSun is one of the largest manufacturers of high-quality resins for 3D printing.

Recommended Accessories:

• Nitrile protective gloves L 100 pack
• Creality Resin Filter 20 pieces
• 1 Liter Isopropyl alcohol / Isopropanol 99.8%

eResin-PLA Pro characteristics: 

• Best price-performance ratio among all resin for DLP and LCD printers. 
  
• Organic PLA polyol synthesized UV-Resin 
  
• Specifically developed for LCD/LED SLA printers to achieve the best print quality. 
  
• The resin is compatible with all LCD printers with a 405nm wavelength. 
  
• Odor Neutral 
  
• High strength  
  
• Smooth printing surface 
  
• High resolution  

Application, important information: 

• Shake before use. Not too firm, so that no air bubbles form. Avoid direct sunlight during application. 
  
• Keep the resin out of the reach of children. 
  
• Wear gloves before use to avoid direct contact with the skin. 
  
• Ventilate the room well. 
  
• If accidentally in contact with the skin: Wash immediately with plenty of water. 
  
• Printed models must be cleaned with highly concentrated alcohol (>95%) for about 30 seconds. 
  
• Finally, we recommend that you cure the printed parts under UV light until the final strength is achieved. You can use UV-LEDs or alternatively sunlight (2-3h) as a UV light source. 

Download: 

• Safety data sheet 
  
• Technical Data Sheet eResin-PLA Pro
  
• Print parameters eResin-PLA Pro

Technical Details: 

• Manufacturer: eSun 
  
• Type: eResin-PLA Pro 
  
• Color: Black
  
• Manufacturer SKU: ERESINPLAPRO-B05 
  
• Viscosity: 200-300mPa*s 
  
• Density: 1.1g/cm3 
  
• Tensile strength: 37-48MPa 
  
• Elongation at break: 25-28% 
  
• Bend resistance: 36-49MPa 
  
• Impact toughness: 32-36J/m 
  
• Hardness (Shore D): 78-80 
  
• Resin weight: 500g

Delivery content:  

• 1x eResin-PLA Pro Black 0.5Kg UV 405nm eSun