Standard Resin Black 0.5Kg UV 405nm eSun

This affordable standard resin from Esun offers great value for money with good print quality. This standard UV-photopolymer resin contains methacrylate monomers to reduce volume shrinkage during the light curing process, making it possible to 3D print objects with incredible finesse. The resin is compatible with most DLP and LCD 3D printers. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended Accessories:

Nitrile Protective Gloves L 100 Pack
Creality Resin Filter 20 Pieces
1 Liter Isopropyl Alcohol / Isopropanol 99.8%

Features Standard Resin:

Best value for money among all resins for DLP and LCD printers.
Low volume shrinkage as the resin has added methacrylate monomers.
Specially developed for LCD/LED SLA printers to achieve the best print quality.
The resin is compatible with all LCD printers with 405nm wavelength.
High hardness and scratch resistance of 78-82D (Shore).
Faster print speed.
High precision in printing.
Very good moisture resistance.
Long durability as the resin is delivered in light-tight aluminum bottles.

Application, important information:

Shake before use. Not too hard to avoid air bubbles. Avoid direct sunlight during application.
Keep the resin away from children.
Wear gloves before use to avoid direct skin contact.
Ventilate the room well.
In case of accidental contact with skin: Wash immediately with plenty of water.
Fully printed models must be cleaned with high-concentration alcohol (>95%) for about 30 seconds.