eResin-PLA Pro Gray 0.5Kg UV405nm eSun

eResin-PLA Pro Grey is a PLA polyol synthesized UV resin from eSun. The resin is made from organic compounds like PLA, making it very odor neutral compared to conventional resin. The eResin-PLA Pro impresses with high strength, resolution and excellent value for money. The resin is compatible with mono and multicolored displays and is suitable for small delicate as well as larger models equally. With its top value for money and neutral smell, we recommend eResin-PLA Pro as the perfect beginner resin, or as the cheap all-rounder for experienced builders in resin printing. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended accessories:

• Nitrile protective gloves L 100 pack
• Creality Resin Filter 20 pieces
• 1 Liter Isopropyl alcohol / Isopropanol 99.8%

Features eResin-PLA Pro: 

• Best value for money among all resin for DLP and LCD printers. 
  
• Organic PLA polyol synthesized UV resin 
  
• Specially developed for LCD/LED SLA printers to achieve the best print quality. 
  
• The resin is compatible with all LCD printers with a 405nm wavelength. 
  
• Odor neutral 
  
• High strength  
  
• Smooth print surface 
  
• High resolution  

Application, important information: 

• Shake well before use. Not too hard, so that no air bubbles form. Avoid direct sunlight during use. 
  
• Keep the resin away from children. 
  
• Wear gloves before use to avoid direct contact with the skin. 
  
• Ventilate the room well. 
  
• In case of accidental contact with the skin: Wash immediately with plenty of water. 
  
• Finished printed models must be cleaned with high-concentration alcohol (>95%) for about 30 seconds. 
  
• Finally, we recommend you to cure the printed parts under UV light until the final strength is reached. As a UV light source, you can use UV-LEDs or alternatively also sunlight (2-3h). 

Download: 

• Safety data sheet 
  
• Technical data sheet eResin-PLA Pro
  
• Printing parameters eResin-PLA Pro

Technical Details: 

• Manufacturer: eSun 
  
• Type: eResin-PLA Pro 
  
• Color: Grey 
  
• Manufacturer SKU: ERESINPLAPRO-H05 
  
• Viscosity: 200-300mPa*s 
  
• Density: 1.1g/cm3 
  
• Tensile strength: 37-48MPa 
  
• Elongation at break: 25-28% 
  
• Flexural strength: 36-49MPa 
  
• Impact resistance: 32-36J/m 
  
• Hardness (Shore D): 78-80 
  
• Resin Weight: 500g

Delivery contents:  

• 1x eResin-PLA Pro Grey 0.5Kg UV405nm eSun