LPS8 V2 Indoor Multichannel LoRaWAN Gateway with TTN and Node-Red Server

The LPS8v2 is an open-source LoRaWAN gateway with local TTN and Node-Red server by Dragino. This allows you to connect a LoRa radio network with an IP network via WiFi or Ethernet. With LoRa wireless, users can send data and achieve extremely large ranges at low data rates. The LPS8v2 has an integrated local TTN and Node-Red server. This allows you to operate autonomously without having to connect to an external server. The LPS8v2 uses the Semtech packet forwarder and is fully compatible with the LoRaWAN protocol. The gateway includes an SX1302 chip from Semtech that provides 10 programmable parallel demodulation paths and two SX1250 for the downlink. This combination offers you a higher data transfer rate than a solution with a single SX1301/SX1308 chip. 

Info: To support all features you should perform a firmware update as soon as you receive it. 

Recommended accessories:

• Node-RED comprehensive handbook by Udo Brande
  

Features:  

• Integrated local TTN server 
• Integrated local Node-Red server 
• Open Source Wrt-System 
• LoRa frequency band EU868/868MHz 
• LoRaWAN Gateway 
• Managed via Web GUI, SSH via LAN or WiFi 
• 10 programmable parallel demodulation paths  

Documentation:  

• Dragino Wiki User Manual

Technical details: 

• Manufacturer: Dragino  
• Manufacturer SKU: LPS8v2-EU868  
• Input voltage: 5V 
• Current: 2A 
• Ports: 10M/100M RJ45, USB-C PWR 5V 2A, USB-A 
• Wi-Fi protocol: 802.11 b/g/n 
• Operating temperature: -20°C - 65°C 
• LoRa Receiver: 1x SX1302 
• LoRa Transceiver: 2x SX1250 
• Max output power: 20dBm 
• Sensitivity: -140dBm 
• Dimensions: 120 x 120x 25mm 
• Weight: 340g 

Package includes:  

• 1x LPS8 V2 Indoor Multichannel LoRaWAN Gateway with TTN and Node-Red Server 
• 1x Antenna 
• 1x USB-C Cable 
• 1x USB power adapter