Arduino 4 Relay Shield
With the Arduino 4 Relays Shield, you can control high-performance loads that cannot be directly controlled by the digital I/Os of your Arduino board. This extension has four relays, each with two changeover contacts (NO and NC). These contacts are wired in parallel to increase the current capacity of each output. Four LEDs show you the on and off status of each relay. The shield does not require an external power supply as it is powered via the 5V and 3.3V pins of the Arduino board.
Features:
- Four Relays: The shield has four relays, each with a maximum switching power of 60 W.
- Changeover contacts: Each relay provides two changeover contacts (NO and NC), which are wired in parallel.
- LED Indicators: Four LEDs indicate the on and off status of each relay.
- No external power supply: The shield is powered via the 5V and 3.3V pins of the Arduino board.
- Compatibility: The shield is compatible with all Arduino boards, following both 5V and 3.3V standards.
- TinkerKit Interfaces: The shield has multiple TinkerKit input/output and communication interfaces.
- Maximum Current Consumption: The power consumption is 140 mA when all relays are turned on.
- Physical Characteristics: The maximum length and width of the PCB are 2.7 and 2.1 inches.
Application Examples:
- Home Automation: Control lighting and heating systems in your home.
- Industrial Control: Automate machines and devices in a production environment.
- Security Applications: Operate alarm systems and access control systems.
- Prototype Development: Develop and test new electronic projects and prototypes.
- Educational Purposes: Use it in training and workshops to convey the working of relays and controls.
Documentation:
Technical Specifications:
- Manufacturer: Arduino
- Manufacturer SKU: A000110
- Operating Voltage: 5V
- Current Consumption: 140 mA (when all relays are on, approximately 35 mA per relay)
- Maximum Load Voltage: 48 V
- Maximum Switching Power: 60 W
- PCB Size: 53 x 68.5 mm
- Compliances: CE, FCC, RoHS, REACH
- Dimensions: 63 x 86 x 37 mm
- Weight: 67g
Package Contents:
- 1x Arduino 4 Relays Shield
Arduino 4 Relay Shield
- Brand: Arduino
- Product Code: 423690
- Availability: In Stock
-
CHF26.90
- Ex Tax: CHF24.88
Related Products
Arduino UNO Rev.3 SMD Board Atmega328
The original Arduino Uno Rev3 SMD is a microcontroller board based on the ATmega328P. This latest ve..
CHF22.90 Ex Tax: CHF21.18
Arduino Mega 2560 Rev3
The original Arduino Mega 2560 is a microcontroller board equipped with an ATmega2560. It features 5..
CHF44.90 Ex Tax: CHF41.54
Arduino Leonardo with Headers
The original Arduino Leonardo is a microcontroller board based on the ATmega32u4, and has 20 digital..
CHF24.90 Ex Tax: CHF23.03
Arduino Uno Rev3
The original Arduino UNO is a microcontroller board based on the ATmega328P with 14 digital input / ..
CHF25.90 Ex Tax: CHF23.96
Arduino 4 Relay Shield
With the Arduino 4 Relays Shield, you can control high-performance loads that cannot be directly con..
CHF26.90 Ex Tax: CHF24.88
Arduino 9 Axis Motion Shield
With the Arduino 9 Axis Motion Shield, you extend your Arduino board with the ability to measure and..
CHF29.90 Ex Tax: CHF27.66
Arduino Motor Shield Rev3
The Arduino Motor Shield Rev3 enables you to control DC and stepper motors, relays, and solenoids wi..
CHF25.90 Ex Tax: CHF23.96
Arduino Ethernet Shield Rev2
With the Arduino Ethernet Shield, you can connect your Arduino board to the internet in minutes. Sim..
CHF32.90 Ex Tax: CHF30.43
Tags: Relay, Shield, Relay, Control, Loads, Automation, Home automation, Prototyping, Electronics, Arduino Shield, Relay control, Arduino Projects, DIY, Arduino Accessories, Arduino