800x480 7.5inch Black/White E-Ink Display Raspberry Pi HAT

This is a XXL E-Ink / ePaper Display Module 7.5inch with 800×480 pixel resolution, with built-in controller that communicates over the SPI interface. With its extremely low power consumption, it is great for battery-powered applications. These displays are also used in sales as price tags, where they can be operated with a battery for several years. The display has a very good viewing angle and can also be read very well in sunlight. It takes 6 seconds to build up the image of the entire display. Therefore, it is naturally not intended for applications where the display needs to be updated every 1s.

Features:  

• On-board level converter, therefore compatible with 3.3V and 5V microcontrollers
  
• Displays on the display are also retained without power supply 
  
• Ultra-low power consumption 
  
• Basically, power is only needed for refreshing  
  
• SPI interface for connection to controller boards such as Raspberry Pi, Arduino, ESP8266 or ESP32 
  
• Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  
• Good documentation and sample code available on Waveshare Wiki 
  
• Programming examples available for the following controllers: Arduino, stm32 and Raspberry Pi 
  

Documentation: 

• Waveshare Wiki: https://www.waveshare.com/wiki/7.5inch_e-Paper_HAT
  

Alternative Libraries for Arduino and STM32:

• GxEPD: https://github.com/ZinggJM/GxEPD2
  

Technical Details:  

• Manufacturer: Waveshare
• Manufacturer SKU: 13504
• Operating Voltage: 3.3V / 5V
  
• Interface: 3-wire SPI, 4-wire SPI  
  
• Outer Dimension: 170.2mm × 111.2mm  
  
• Display Dimension: 163.2mm × 97.92mm  
  
• Pixel Size: 0.205mm × 0.204mm  
  
• Resolution: 800×480
  
• Display Color: Black, White  
  
• Gray Level: 2   
  
• Full Refresh Time: 5s  
  
• Refresh Power: 38mW(typ.)  
  
• Standby Power: <0.017mW  
  
• Viewing Angle: >170°  
  
• Weight: 180g  
  

Delivery Content  

• 1x 800×480 7.5inch Black / White E-Ink Display Raspberry Pi HAT
  
• 1x e-Paper Driver HAT
  
• 1x Mounting material for Raspberry Pi
  
• 1x PH2.0 8-Pin 20cm cable for Arduino or alternative microcontroller