1200x825 9.7inch Black/White E-Ink Display Raspberry Pi HAT

This is a large 9.7 inch E-Ink / ePaper display module with a resolution of 640 x 384 pixels. The module has an integrated IT8951 controller that communicates via USB, SPI, I80, or I2C interface. This black / white display supports updates of sub-areas. Thus, individual areas can be quickly updated within 0.3 seconds. Updating the entire display also only takes one second. Due to the low power consumption, it is great for battery-operated applications. These displays are also used in retail as price tags, where they can be operated for several years with a battery. The display has a very good viewing angle and can also be read very well in sunlight. 6 seconds are required for the construction of the entire display image. Therefore, it is of course not intended for applications where the display must be updated every 1s.

Features:  

• Displays on the display remain even without power supply 
• Ultra low power consumption 
• Basically, the power is only needed for refreshing  
• USB/SPI/I80/I2C interface for connection with host boards like Raspberry Pi or Nucleo
• Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
• Good documentation and sample code at Waveshare Wiki available 
• Programming examples for the following controllers available: STM32 and Raspberry Pi 

Documentation: 

• Waveshare Wiki

Technical details:  

• Type: GDEP097TC2
• Driver chip: IT8951
• Operating voltage: 5V  
• Interfaces: USB/SPI/I80/I2C
• External dimension: 218.8 x 156.425 x 1.15mm  
• Display dimension: 202.8 x 139.425mm  
• Pixel size: 0.169 x 0.169mm   
• Resolution: 1200 x 825
• Display color: Black, White  
• Gray level: 2-16   
• Full refresh time: <1s  
• Viewing angle: >170°  
• Weight: 397g  

Package includes  

• 1x 1200x825 9.7inch Black / White E-Ink Display Raspberry Pi HAT
• 1x e-Paper IT8951 Driver HAT
• 1x 9.7inch e-Paper Adapter
• 1x 33PIN FFC Cable
• 1x Mounting hardware for Raspberry Pi
• 1x PH2.0 8-Pin 20cm Cable for STM32 or alternative microcontroller