3D ToF Depth Sensor Camera with LCD Display
This 3D ToF depth camera from DFRobot is the MaixSense-A010 from Sipeed. It measures distances from 0.15 to 1.5 m for 100 × 100 pixels at the same time and creates a depth map from them. The built-in 1.14 inch LCD shows the depth map in colour in real time, with the distance to the measuring point in the centre. The data are output via USB-C as a virtual serial port or via UART; guides are available for ROS1 and ROS2. The module has no colour (RGB) camera.
Features:
- ToF depth sensor 100 × 100 pixels, 20 frames per second
- Measuring range 0.15 to 1.5 m, field of view 70° × 60°
- 1.14 inch LCD for previewing the depth map, two buttons
- USB-C (virtual serial port) and UART
- Supports ROS1 and ROS2, preview on the PC with COMTOOL
- Low power consumption, 5 V supply
Application Examples:
- Navigation, SLAM and obstacle detection on robots and automated guided vehicles
- Counting people and monitoring access
- Gesture recognition
- Measuring dimensions of objects and capturing simple 3D models
Documentation:
- Wiki DFRobot SEN0581
- Getting started (DFRobot Wiki)
- ROS2 guide (DFRobot Wiki)
- Datasheet (PDF)
- Sipeed Wiki MaixSense-A010
Technical Data:
- Manufacturer: DFRobot
- Manufacturer SKU: SEN0581
- Processor: BL702, 32-bit RISC with FPU, up to 144 MHz
- Memory: 132 KB RAM, 192 KB ROM
- Depth resolution: 100 × 100 at 20 fps
- Measuring range: 0.15 to 1.5 m
- Accuracy: max. 1 % (DFRobot)
- Field of view: 70° horizontal × 60° vertical
- Supply: 5 V / 0.5 A
- Interfaces: USB 2.0 Type-C, UART (1.25 mm connector, 4-pin: TX, RX, GND, 5V)
- Display: 1.14 inch LCD
- Software: ROS1 and ROS2
- Operating temperature: -20 to 50 °C
- Dimensions: 23.25 × 40.7 × 10.5 mm
- Weight: about 10 g (DFRobot)
Scope of Delivery:
- 1× 3D ToF depth camera MaixSense-A010
- 1× USB cable
- 1× UART cable
3D ToF Depth Sensor Camera with LCD Display
- Brand: DFRobot
- Product Code: 423360
- Availability: In Stock
-
CHF39,90
- Ex Tax: CHF36,91
Related Products
RPLIDAR A1M8-R6 360 Degree Laser Scanner
The RPLIDAR A1 from SLAMTEC is a 2D laser scanner that rotates clockwise and scans its surroundings ..
CHF119,00 Ex Tax: CHF110,08
YDLIDAR GS2 Linear Array Solid LiDAR 25-300mm 100°
The GS2 from YDLIDAR is a LiDAR without moving parts. It measures distances of 25 mm to 300 mm over ..
CHF49,90 Ex Tax: CHF46,16
Lidar Sensor D500 12m 360 Degree UART/USB
The Lidar Sensor D500 with a range of up to 12 meters and a 360-degree detection angle revolutionize..
CHF109,90 Ex Tax: CHF101,67
RPLIDAR C1 12m 360 Degree Laser LiDAR Scanner
The RPLIDAR C1 from SLAMTEC is a 360-degree laser scanner that measures the direct time of flight of..
CHF79,90 Ex Tax: CHF73,91
Tags: 3D, ToF, Camera, Depth Sensor, LCD Display, ROS Support, Robotics, 3D Modeling, Facial Recognition, IoT Applications, USB 2.0, Low Power Consumption, SLAM, VR/AR, Gesture Recognition, Autopilot, AGV, Liveness Detection, ROS1, ROS2, MaixSense-A010, MaixSense, sipeed, SEN0581










