200x200 1.54inch 3-Color E-Ink Display

This Waveshare E-Ink / e-paper display module has 1.54 inches, 200 × 200 pixels and an integrated controller that communicates via SPI. It displays the three colours red, black and white. Thanks to its extremely low power consumption it is suitable for battery-powered applications. Such displays are also used as price tags in retail, where they run for several years on one battery. A full image update takes about 14 seconds, so the display is not intended for applications that update every second.

Recommended Accessories:

• Dupont Cables M-M 10cm 20 Pieces

Features:

• Level converter on the board, therefore compatible with 3.3 V and 5 V microcontrollers
• The image remains visible without power supply
• Power is basically only needed for refreshing
• Viewing angle over 170°, easy to read even in sunlight
• SPI interface for Raspberry Pi, Arduino, ESP8266 or ESP32
• On the board, BS (printed) selects between 4-wire SPI (0) and 3-wire SPI (1)
• The supplied cable plugs directly onto a Raspberry Pi, for Arduino UNO or a breadboard 8 additional male/male Dupont cables are needed
• Example code from Waveshare for Arduino, STM32 and Raspberry Pi

Application Examples:

• Price tags and labels
• Battery-powered displays for measured values and weather data
• Status displays that change rarely

Documentation:

• Waveshare Wiki 1.54inch e-Paper Module (B)
• Waveshare e-Paper examples (GitHub)
• GxEPD2 Arduino library (GitHub)

Technical Data:

• Manufacturer: Waveshare
• Manufacturer SKU: 13338
• Type: GDEH0154Z90
• Driver IC: SSD1681
• Operating voltage: 3.3 V / 5 V
• Interface: 3-wire SPI, 4-wire SPI
• Connections: VCC, GND, DIN, CLK, CS, DC, RST, BUSY
• Outer dimensions: 48 × 33 mm
• Display area: 27.6 × 27.6 mm
• Pixel pitch: 0.138 × 0.138 mm
• Resolution: 200 × 200
• Display colour: Red, black, white
• Grey levels: 2
• Full refresh: 14 s
• Refresh power: 26.4 mW (typ.)
• Standby: <0.017 mW
• Viewing angle: over 170°
• Weight: 33 g

Scope of Delivery:

• 1× 200 × 200 1.54" 3-colour E-Ink Display
• 1× Cable PH2.0 to 1×8-pin female Dupont 20 cm