128x128 1.5inch RGB OLED Display Module SPI
This practical, large, colorful OLED display with 65K different colors is perfect for your Arduino projects. The OLED display has a diagonal of 1.5 inches with a resolution of 128x128 pixels. Thanks to the integrated controller, you can control the display via the SPI interface. Thanks to ready-made Arduino libraries, controlling is a piece of cake. The display is also perfect for the ESP8266, as it can also be operated with 3.3V.
Arduino Library:
https://github.com/olikraus/ucglib
Documentation OLED Display 128x128:
Waveshare Wiki: https://www.waveshare.com/wiki/1.5inch_RGB_OLED_Module
Connections RGB OLED Display 128x128:
Symbol | Description |
VCC | Power supply (3.3V to 5V) |
GND | Ground |
DIN | Data input |
CLK | Clock data input |
CS | Chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | Reset, low active |
There are two types of communication for the OLED, which can be set with the BS resistor (default SPI): 4-wire SPI and I2C:
BS | CS | DC | DIN | CLK | |
4-wire SPI | 0 | Chip select | Data/Command | MOSI | SCK |
I2C | 1 | NC | I2C address selection | SDA | SCL |
Technical Details:
- Driver IC: SSD1351
- Operating voltage: 3.3VDC / 5VDC
- Connection: Pluggable via PH2.0 7Pin or solder connection
- Resolution: 128 x 128
- Display Colors: RGB, 65K colors
- Display size Diagonal: 1.5’’
- Interface: SPI configurable via BS resistor (3-wire SPI or 4-wire SPI)
- Viewing angle: >160°
- Weight: 26g
- Dimension: 45 x 37 x 9.4mm
Scope of Delivery:
- 1x 128x128 1.5inch RGB OLED Display Module SPI
- 1x PH2.0 / XH2.0mm to 1x7Pin Female Dupont Cable 20cm
128x128 1.5inch RGB OLED Display Module SPI
- Brand: Waveshare
- Product Code: 420632
- Availability: In Stock
-
CHF19,50
- Ex Tax: CHF18,04
Related Products
Tags: OLED, Display, Module, Color display, Colorful, RGB, Waveshare, SSD1351, SPI, 128x128, 1.5, Graphic Display, Show, Graphic, Graphics, 5V, 3.3V, PH2.0, XH2.0, 14747