OLED Display 64x128 1.3inch white I2C SPI
This practical 1.3-inch OLED display is perfect for your Arduino projects. Thanks to ready-made Arduino libraries, the Arduino can easily control it. The display is also perfect for the ESP8266 as it can also be operated with 3.3V. By default, the display is controlled via SPI. If you want to control the display via I2C, you have to solder the "IM" bridge on the back.
You can find a suitable library for Arduino at the following link on Github:
Download and Links:
- Waveshare Wiki: https://www.waveshare.com/wiki/1.3inch_OLED_Module_(C)
Connections OLED Display:
Symbol | Description |
VCC | 3.3v power supply |
GND | Ground |
DIN | Data input |
CLK | Clock data input |
CS | Chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | Reset, low active |
There are two communication types for the OLED that are set with the BS resistor (default SPI): 4-wire SPI and I2C:
BS | CS | DC | DIN | CLK | |
4-wire SPI | 0 | Chip select | Data/Command | MOSI | SCK |
I2C | 1 | NC | I2C address selection | SDA | SCL |
Technical Details:
- Driver IC: SH1107
- Manufacturer: Waveshare
- Manufacturer SKU: 18179
- Operating voltage: 3.3V DC
- Resolution: 64 x 128
- Pixel size: 0.15 x 0.15mm
- Diagonal display size: 1.3’’
- Color: White on black
- Interface: I2C / SPI configurable via "IM" resistor
- Display dimension: 14.7 x 29.42mm
- Dimension: 40 x 30.5 x 9.2mm
- Weight: 22g
Scope of Delivery:
- 1x OLED Display 64x128 1.3inch white I2C SPI
- 1x PH2.0 / XH2.0mm to 1x7Pin Female Dupont cable 20cm
OLED Display 64x128 1.3inch white I2C SPI
- Brand: Waveshare
- Product Code: 421403
- Availability: In Stock
-
CHF12,90
- Ex Tax: CHF11,93
Related Products
Tags: Waveshare, OLED, 64x128, White, Display, 3.3V, Display, Module, Breakout, Raspberry, SH1107, Monochrome, Graphic Display, Graphic, Graphic, PH2.0, XH2.0, 614961958524, 18179