OLED Display 128x128 1.5\" white I2C SPI
This handy large 1.5inch OLED Display is perfect for your Arduino projects. The display is also suitable for mobile battery-powered applications due to its low power consumption. Thanks to ready-made Arduino libraries, the display is easy to control. The display is also perfect for the ESP8266 as it can operate at 3.3V.
You can find a suitable library for Arduino at the following link on Github:
https://github.com/olikraus/u8g2
Documentation OLED Display 128x128:
Waveshare Wiki: https://www.waveshare.com/wiki/1.5inch_OLED_Module
Connections OLED Display 128x128:
Symbol | Description |
VCC | Power supply (3.3V to 5V) |
GND | Ground |
DIN | Data input |
CLK | Clock data input |
CS | Chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | Reset, low active |
The OLED has two communication modes that can be set with the BS resistor (Default SPI): 4-wire SPI and I2C:
BS | CS | DC | DIN | CLK | |
4-wire SPI | 0 | Chip select | Data/Command | MOSI | SCK |
I2C | 1 | NC | I2C address selection | SDA | SCL |
Technical Details:
- Driver IC: SSD1327
- Operating voltage: 3.3VDC / 5VDC
- Resolution: 128 x 128
- Grayscale: 16
- Display size diagonal: 1.5''
- Color: White on black
- Interface: I2C / SPI configurable via BS resistor
- I2C Address: 0x7A
- Viewing angle: >160°
- Weight: 23g
- Dimension: 45 x 37 x 9.5mm
Package Content:
- 1x OLED Display 128x128 1.5” White I2C SPI
- 1x PH2.0 / XH2.0mm to 1x7Pin Female Dupont cable 20cm
OLED Display 128x128 1.5\" white I2C SPI
- Brand: Waveshare
- Product Code: 420595
- Availability: In Stock
-
CHF16,50
- Ex Tax: CHF15,26
Related Products
Tags: Waveshare, OLED, 128x128, White, Display, 5V, 3.3V, Display Module, Breakout, Raspberry, SSD1327, Monochrome, Graphic Display, Graphic, Graphic, PH2.0, XH2.0, 13992