Universal Raw Driver e-Paper Shield for Arduino / NUCLEO

This universal Waveshare e-Paper Shield connects raw E-Ink displays (e-paper raw panels without PCB) directly to an Arduino or NUCLEO board. It plugs onto the board, and the panel connects with the supplied adapter and FFC cable. Because a display needs a lot of memory, the shield carries an external RAM with 128 KByte; images can also be stored on a microSD card.

Recommended Accessories:

• 200x200 1.54inch E-Ink Raw Black / White e-Paper Display
• 250x122 2.13inch E-Ink Raw Black / White e-Paper Display
• 296x128 2.9inch E-Ink Raw Black / White e-Paper Display
• 400x300 4.2inch E-Ink Raw Black/White e-Paper Display
• Arduino Uno Rev3

Features:

• According to Waveshare compatible with Arduino UNO, Leonardo, NUCLEO and XNUCLEO
• Level converter on the board for 3.3 V and 5 V microcontrollers
• Slot for microSD card, show images from the card
• SPI Config: SPI via the ICSP connector (default) or via D13, D12, D11
• Slide switch position A for 1.54", 2.13" and 2.9" black / white, i.e. 420630, 420631 and 420634
• Slide switch position B for the other panels, for example 4.2" black / white 420637
• Interface Config: 0 for 4-line SPI, 1 for 3-line SPI (as printed)

Application Examples:

• Run e-paper displays on Arduino and NUCLEO
• Show images from the microSD card
• Displays for measured values and status that change rarely

Documentation:

• Waveshare Wiki e-Paper Shield
• GxEPD2 Arduino library (GitHub)

Technical Data:

• Manufacturer: Waveshare
• Manufacturer SKU: 15082
• Operating voltage: 3.3 V / 5 V
• Interface: 3-wire SPI, 4-wire SPI (default)
• RAM: 1 Mbit / 128 KByte
• Connections: SD_CS, RAM_CS, EPD_BUSY, EPD_RST, EPD_DC, EPD_CS, SCLK, MOSI, MISO, GND, VCC
• Dimensions: 53.34 × 53.34 mm
• Weight: 29 g

Scope of Delivery:

• 1× Universal Raw e-Paper Driver Shield for Arduino / NUCLEO
• 1× e-Paper raw adapter
• 1× 24-pin FFC cable
• The e-paper display in the photos is not included