ThinkNode M9 MeshCore ESP32-S3 with Keyboard and GPS 868MHz

The ThinkNode M9 MeshCore ESP32-S3 with Keyboard and GPS 868MHz is a standalone wireless communication terminal in a mobile phone form factor. It combines display, input, communication, and positioning in a compact housing, eliminating the need for external devices like smartphones or Bluetooth receivers. The pre-installed MeshCore firmware allows immediate access to decentralized mesh networks upon power-up, including messaging and location sharing. Updates are installed via the MeshCore web flasher. Alternatively, the Meshtastic firmware can be installed via the Meshtastic web flasher, where the M9 is officially listed. The main processor is an ESP32-S3 Dual-Core with up to 240 MHz, complemented by 512 KB SRAM, 8 MB PSRAM, 16 MB flash and a microSD slot holding a factory-installed 16 GB card. For long-range communication, the Semtech LR1110 LoRa chip with an integrated FPC antenna operates at 868 MHz. The integrated GNSS module supports BeiDou, GPS, Galileo, and GLONASS simultaneously and is complemented by a magnetic compass sensor for directional indication. The physical QWERTY full keyboard with 37 keys enables efficient text input, while the 2.4-inch TFT-LCD with 240×320 pixels displays messages and map data clearly. A 2300-mAh lithium-polymer battery powers the device, offering a standby runtime of two to three days. Additionally, Bluetooth 5.0, Wi-Fi (802.11 b/g/n, 2.4 GHz), a buzzer for audio feedback, and an RTC clock for time synchronization are available.


Recommended Accessories:


Features:

  • Standalone communication terminal in a mobile phone form factor without dependency on external devices.
  • Pre-installed MeshCore firmware enables immediate access to decentralized mesh networks after power-up.
  • ESP32-S3 Dual-Core processor with 240 MHz, 8 MB PSRAM and 16 MB flash ensures stable performance.
  • Semtech LR1110 LoRa chip with integrated antenna enables long-range communication at 868 MHz.
  • Integrated multi-GNSS module with compass sensor supports BeiDou, GPS, Galileo, and GLONASS simultaneously.
  • Physical QWERTY full keyboard with 37 keys offers tactile and efficient text input.

Application Examples:

  • Off-grid communication for outdoor activities such as hiking or mountain climbing.
  • Emergency communication during natural disasters or power outages without cellular network.
  • Location sharing and coordination in groups during expeditions or convoy trips.
  • Setting up local mesh networks for community communication in remote areas.
  • Use in scientific field studies for data transmission without infrastructure.
  • Joining existing Meshtastic networks after switching to the Meshtastic firmware.

Documentation:



Technical Specifications:

  • Manufacturer: Elecrow
  • Manufacturer SKU: LMM16509D 868 MHz
  • Main Chip: ESP32-S3R8
  • Processor: Xtensa 32-bit LX7 Dual-Core, up to 240 MHz
  • System Memory: 512 KB SRAM, 8 MB PSRAM, 384 KB ROM
  • Storage: 16 MB flash (ZD25Q128), microSD slot with installed 16 GB card
  • Firmware: MeshCore Ripple (pre-installed), Meshtastic as an alternative
  • Development Languages: MicroPython, C/C++
  • Development Environments: ESP-IDF, Arduino IDE, LVGL Library
  • LoRa Chip: Semtech LR1110, 868 MHz (FPC Antenna)
  • Bluetooth: Bluetooth Low Energy and Bluetooth 5.0
  • Wi-Fi: 802.11 b/g/n, 2.4 GHz
  • GNSS: BeiDou, GPS, Galileo, GLONASS (ATGM336H)
  • Display: 2.4-inch TFT-TN LCD, 240×320 pixels, 200 cd/m²
  • Keyboard: QWERTY full keyboard, 37 keys
  • Keyboard controller: ESP32-S2
  • Interface: USB Type-C (Full-Speed USB 2.0), charging and firmware upload
  • Antenna: Integrated GPS, Wi-Fi/BLE, and LoRa antenna
  • Battery: Lithium-Polymer, 2300 mAh / 3.8 V
  • Magnetometer: QMC6309 (compass)
  • Motion sensor: QMI8658B
  • RTC: PCF8563, time synchronization and fast warm start
  • Buzzer: Audio notifications
  • Housing Material: Plastic
  • Operating Temperature: -10 to 60 °C
  • Storage Temperature: -20 to 70 °C
  • Relative Humidity: 10–90% (non-condensing)
  • Product Dimensions: 126 × 67 × 10.3 mm
  • Product Weight: 123 g
  • Packaging Dimensions: 155 × 86 × 36 mm
  • Gross Weight: 202 g

Contents:

  • 1× ThinkNode M9 MeshCore ESP32-S3 with Keyboard and GPS 868MHz
  • 1× USB-C cable
  • 1× ThinkNode M9 Starter Card

Safety and disposal instructions

Charge only with a suitable charger. Do not short-circuit, open, damage or heat the battery above 60 °C. Keep out of reach of children. Do not use if damaged or deformed.

Disposal: Batteries and accumulators do not belong in household waste. Free return to us or any sales point – see Return & Disposal.


Write a review

Note: HTML is not translated!
    Bad           Good

ThinkNode M9 MeshCore ESP32-S3 with Keyboard and GPS 868MHz

  • Brand: Elecrow
  • Product Code: 425915
  • Availability: Out Of Stock
  • CHF79.90

  • Ex Tax: CHF73.91

Related Products

ThinkNode M1 Meshtastic with GPS and ePaper Display

ThinkNode M1 Meshtastic with GPS and ePaper Display

With the ThinkNode M1, you take your mesh communication to the next level. This compact transceiver ..

CHF55.90 Ex Tax: CHF51.71

LilyGo T-Deck Plus ESP32-S3 868MHz LoRa module with 2.8-inch display and external antenna for Meshtastic

LilyGo T-Deck Plus ESP32-S3 868MHz LoRa module with 2.8-inch display and external antenna for Meshtastic

Discover the powerful LilyGo T-Deck Plus with the ESP32-S3 and integrated 868MHz LoRa technology for..

CHF89.90 Ex Tax: CHF83.16

LilyGo T-Deck Pro 868MHz LoRa Module with 2.8 Inch E-Ink Display

LilyGo T-Deck Pro 868MHz LoRa Module with 2.8 Inch E-Ink Display

The LilyGo T-Deck ESP32-S3 is a powerful all-in-one module with an integrated 2.8-inch E-Ink display..

CHF99.00 Ex Tax: CHF91.58

LILYGO TTGO T-Lora Pager ESP32-S3 868mhz IPS LCD

LILYGO TTGO T-Lora Pager ESP32-S3 868mhz IPS LCD

The LilyGO T-LoRa Pager K257 is an innovative handheld device based on the ESP32-S3, integrating mod..

CHF89.90 Ex Tax: CHF83.16

LilyGo T-Deck Pro 868MHz LoRa Module with 2.8 Inch E-Ink Display Meshtastic

LilyGo T-Deck Pro 868MHz LoRa Module with 2.8 Inch E-Ink Display Meshtastic

The LilyGo T-Deck Pro Meshtastic is a versatile all-in-one communication device with pre-installed M..

CHF109.00 Ex Tax: CHF100.83

ThinkNode M5 ESP32-S3 Meshtastic with GPS and ePaper Display

ThinkNode M5 ESP32-S3 Meshtastic with GPS and ePaper Display

The Elecrow ThinkNode M5 is a powerful multifunctional device that combines modern wireless communic..

CHF59.90 Ex Tax: CHF55.41

SenseCAP Solar Node P1-Pro MeshCore LoRa Repeater with GPS

SenseCAP Solar Node P1-Pro MeshCore LoRa Repeater with GPS

The SenseCAP Solar Node P1-Pro is a solar-powered LoRa node from Seeed Studio, delivered with the pr..

CHF95.00 Ex Tax: CHF87.88

Wio Tracker L1 Pro with Meshcore and GPS

Wio Tracker L1 Pro with Meshcore and GPS

The Wio Tracker L1 Pro from Seeed Studio is a robust, compact handheld device for the MeshCore radio..

CHF55.90 Ex Tax: CHF51.71

ThinkNode M3 Tracker Card Meshtastic with GPS WiFi BLE 868MHz

ThinkNode M3 Tracker Card Meshtastic with GPS WiFi BLE 868MHz

The ThinkNode M3 by Elecrow is a compact Meshtastic tracker in card format that combines high-precis..

CHF41.90 Ex Tax: CHF38.76

M5Stack Cardputer Mesh Kit for Meshtastic ESP32-S3 868MHz LoRa

M5Stack Cardputer Mesh Kit for Meshtastic ESP32-S3 868MHz LoRa

The M5Stack Cardputer Mesh Kit for Meshtastic is a portable communication terminal that combines LoR..

CHF55.90 Ex Tax: CHF51.71

Tags: ThinkNode, M9, MeshCore, ESP32-S3, LoRa, LR1110, 868MHz, Mesh Network, GNSS, GPS, Keyboard, Meshtastic, Elecrow, QWERTY, Off-Grid