POE Power over Ethernet HAT B for Raspberry Pi with Display
The Waveshare PoE HAT (B) powers a Raspberry Pi 3B+ or 4B via Power over Ethernet according to IEEE 802.3af. Network and power thus come via a single Ethernet cable from a PoE-capable switch or injector. A 0.91 inch OLED display shows IP address, processor temperature and fan status, a fan cools the processor.
Recommended alternative for Raspberry Pi 5: Raspberry Pi 5 POE Power over Ethernet HAT (F)
Recommended Accessories:
- Raspberry Pi 4 Model B 4GB
- Raspberry Pi 4 Model B 8GB
- Cudy POE200 30W Gigabit PoE+ Injector IEEE 802.3at/af
Features:
- 40-pin GPIO header passed through, another HAT can be stacked on top
- PoE according to IEEE 802.3af, fully isolated switch mode power supply
- Fan with switch: runs from power-on or is controlled by program
- PCF8574 I/O expander on the I2C bus, pin P0 controls the fan, further I/O as solder pads
- OLED display via I2C, enable I2C in Raspberry Pi OS
Application Examples:
- Raspberry Pi as server or camera without its own power supply
- Installation where only a network cable is available
Documentation:
Technical Data:
- Compatible with: Raspberry Pi 3B+, 4B
- PoE input voltage: 37 V to 57 V DC
- Output: 5 V, 2.5 A
- Network standard: IEEE 802.3af PoE
- OLED: 0.91 inch, 128 × 32 pixels, white, driver SSD1306, I2C
- I/O expander: PCF8574
- Dimensions: 65 × 56.5 mm
- Weight: 95 g
Scope of Delivery:
- 1× POE Power over Ethernet HAT B for Raspberry Pi with Display
POE Power over Ethernet HAT B for Raspberry Pi with Display
- Brand: Waveshare
- Product Code: 421318
- Availability: In Stock
-
CHF23,90
- Ex Tax: CHF22,11
Related Products
Raspberry Pi 4 Model B 4GB
The Raspberry Pi 4 Model B with 4 GB of RAM is a single-board computer with the Broadcom BCM2711 qua..
CHF105,00 Ex Tax: CHF97,13
Raspberry Pi 4 Model B 8GB
The Raspberry Pi 4 Model B with 8 GB of RAM is a single-board computer with the Broadcom BCM2711 qua..
CHF189,90 Ex Tax: CHF175,67
POE Power over Ethernet HAT C for Raspberry Pi
The PoE HAT (C) is an 802.3af-compliant Power-over-Ethernet accessory for the Raspberry Pi 3B+/4B. U..
CHF33,90 Ex Tax: CHF31,36
POE Power over Ethernet HAT D for Raspberry Pi
The PoE HAT (D) is an 802.3af-compliant Power-over-Ethernet accessory for the Raspberry Pi 3B+/4B. B..
CHF23,90 Ex Tax: CHF22,11
POE USB-C Splitter 5V/2.5A IEEE 802.3af
This is a POE IEEE 802.3 af/at (Power over Ethernet) splitter that divides a Gigabit Ethernet into a..
CHF19,90 Ex Tax: CHF18,41
Raspberry Pi 5 POE Power over Ethernet HAT (F)
Discover the ideal way to power and network your Raspberry Pi 5 – all through a single cable! The Ra..
CHF32,90 Ex Tax: CHF30,43
POE USB-C Splitter 5V/5A 25W IEEE 802.3af
With the POE 25 Watt Gigabit Splitter, you can efficiently and reliably power your network-enabled d..
CHF25,90 Ex Tax: CHF23,96
Cudy POE200 30W Gigabit PoE+ Injector IEEE 802.3at/af
The Cudy POE200 is a Gigabit PoE injector that converts a conventional network port into a PoE+-capa..
CHF15,90 Ex Tax: CHF14,71
Tags: POE, HAT, Power over Ethernet, Raspberry Pi, Raspberry, Ethernet, Waveshare, (B), 614961957510, 18014, PCF8574, 802.3af, PoE HAT












