PLA+ Filament 1.75mm White 5Kg eSun

This XXL 5Kg roll of PLA Plus white  by eSun is based on a standard PLA filament. The following properties were optimized:

• Brittleness
• Tensile strength
• Layer adhesion
• Flame retardant
• Odorless during printing

eSUN PLA+ is considered by many as the new standard for PLA printing and also offers a very good price-performance ratio. It is not only easier to process, but you also produce better 3D print parts with smooth and clean surfaces.

Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print, and also gives you good adhesion properties and almost no wrap effect when printing! PLA+ is also a very good alternative to ABS, for example, if something needs to be tough, like printed children's toys! PLA+ has very good tensile and bending resistance to resist falls, shocks, and fractures due to stretching. When printing, no odors are also created with PLA+, as is the case with ABS.

Characteristics of PLA+:

• Very resistant
• Easy to print
• Very good adhesion to the print board
• Top print quality and great price-performance ratio

PLA+ recommended print parameters:

• Print temperature: 205-225°C Recommended: 210°C
• Heatbed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed speed: 40-60mm/s (2400-3600mm/min)

Download:

• eSun Product Manual
• Safety data sheet PLA+
• Data sheet Filament

Technical Details:

• Color: White
• Item number: PLA+175W5
• Weight Filament: 5Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 205-225°C
• Density: 1.24g/cm3
• Melt flow index: 2g/10min
• Impact resistance: 7kJ/m²
• Elongation at break:29%
• Tensile strength: 60MPa
• Shape stability: 52°C
• Spool size diameter outside: 30cm
• Spool width: 16.5cm
• Spool diameter inside (hole): 3.5cm

Scope of delivery:

• 1x PLA+ Filament 1.75mm White 5Kg eSun