OLED Display 64x128 1.3inch white I2C SPI

This Waveshare 1.3 inch OLED display (1.3inch OLED Module (C)) has 64 × 128 pixels with the SH1107 driver and shows white on black. By default it is controlled via SPI, after resoldering the IM resistor on the back via I2C. For Arduino there are libraries such as U8g2, Waveshare provides examples for Raspberry Pi, Arduino and STM32.

Important: According to Waveshare, the operating voltage is 3.3 V. On boards with 5 V logic such as the Arduino UNO, connect the signal lines via a level shifter.

Recommended Accessories:

• 8-Channel Logic Level Converter TXS0108E

Features:

• 4-wire SPI interface by default, I2C via the IM resistor (0 = SPI, 1 = I2C)
• I2C address 0x3C when DC is low
• Connections: VCC, GND, DIN, CLK, CS, DC, RST
• PH2.0 connector with cable to Dupont sockets included

Application Examples:

• Status display for readings and states
• Clock and weather display
• Display for projects with ESP32, ESP8266, Raspberry Pi or Arduino

Documentation:

• Waveshare wiki with examples
• U8g2 library (GitHub)

Technical Data:

• Driver: SH1107
• Manufacturer: Waveshare, SKU 18179
• Operating voltage: 3.3 V DC
• Resolution: 64 × 128 pixels
• Pixel size: 0.15 × 0.15 mm
• Diagonal: 1.3 inch
• Colour: white on black
• Interface: 4-wire SPI or I2C
• Display area: 14.7 × 29.42 mm
• Dimensions: 40 × 30.5 × 9.2 mm
• Weight: 22 g

Scope of Delivery:

• 1× OLED Display 64x128 1.3inch white I2C SPI
• 1× cable PH2.0 7-pin to Dupont female 20 cm