LilyGo T-Impulse Plus 868MHz LoRa SX1262 GPS Tracker
The LilyGo T-Impulse Plus is a power-saving wearable LoRa GPS tracker based on the nRF52840 microcontroller, specifically designed for wearable IoT applications. At its core is the ARM Cortex-M4 processor with a 64 MHz clock speed, 1 MB internal flash memory, and 256 kB RAM. For long-range communication, it features an integrated SX1262 LoRa module (S62F) operating in the 868 MHz frequency band, supporting frequency ranges of 400–520 MHz and 830–945 MHz. Position determination is handled by the MIA-M10Q GNSS module, which receives GPS, GLONASS, BeiDou, and QZSS signals. A 0.49-inch OLED display of type SSD1315 with a resolution of 64 × 32 pixels shows status information directly on the wrist. The inertial sensor measures acceleration, angular rate and magnetic field, depending on the version with the ICM20948 (V1.0) or with the QMI8658A and the QMC6309 magnetometer (V1.1). Additionally, the board features a capacitive touch button (TTP223), a vibration motor, 4 MB of external SPI flash memory, and Bluetooth 5.0 LE for wireless short-range communication. The SGM41562 power management IC handles energy management, enabling USB charging with 5 V and 500 mA. In deep-sleep mode, power consumption is as low as 10–40 µA, and in shutdown mode, it drops below 1 µA. Programming is done via Arduino IDE or PlatformIO, with extensive example programs available on GitHub. LilyGo's test program is installed at the factory. Meshtastic and MeshCore both provide official firmware for the T-Impulse Plus. Neither is listed in the respective web flasher yet; the firmware is downloaded from the GitHub releases page. The battery is built in and is charged via USB-C. A lanyard with snap hook and a USB-C cable are included, a wristband is not.
Important: In Switzerland, a maximum of 25 mW (14 dBm) usually applies in the 868 MHz band. The transmit power is set in the program.
Recommended Accessories:
Features:
- Power-saving design with deep-sleep consumption of just 10–40 µA and shutdown consumption below 1 µA.
- LoRa communication via the SX1262 module enables data transmission over long distances in the 868 MHz band.
- GNSS receiver MIA-M10Q supports GPS, GLONASS, BeiDou, and QZSS for precise positioning.
- Integrated 0.49-inch OLED display (SSD1315) with 64 × 32 pixel resolution for direct display on the wrist.
- Nine-axis motion sensing with accelerometer, gyroscope and magnetometer.
- Bluetooth 5.0 LE allows wireless communication with smartphones and other BLE-enabled devices.
Application Examples:
- Portable GPS tracker for outdoor activities such as hiking or cycling
- Mobile node in a Meshtastic or MeshCore network for communication in remote areas
- Motion detection and step counting via the integrated IMU sensor
- Real-time location transmission for search and rescue operations
- Prototyping platform for wearable IoT sensors and data acquisition
Documentation:
- GitHub T-Impulse-Plus
- LILYGO Wiki T-Impulse Plus
- Datasheet S62F (SX1262)
- Datasheet MIA-M10Q (GNSS)
- Datasheet nRF52840
- Example programs (GitHub)
- Meshtastic firmware for the T-Impulse Plus (GitHub)
- MeshCore firmware for the T-Impulse Plus (GitHub)
Technical Specifications:
- Manufacturer: LilyGo
- Manufacturer SKU: K265-01
- MCU: nRF52840 (ARM Cortex-M4, 64 MHz)
- RAM: 256 kB
- Flash (internal): 1 MB
- Flash (external): 4 MB (ZD25WQ32CEIGR, SPI)
- Bluetooth: Bluetooth 5.0 LE
- LoRa Transceiver: SX1262 (S62F Module)
- Frequency Bands: 400–520 MHz, 830–945 MHz
- GNSS Module: MIA-M10Q (GPS, GLONASS, BeiDou, QZSS)
- Display: 0.49-inch OLED SSD1315, 64 × 32 px (I²C)
- IMU: ICM20948 (V1.0) or QMI8658A + QMC6309 (V1.1)
- Touch Button: TTP223 (capacitive)
- Power Management: SGM41562
- USB Charging: USB-C, 5 V / 500 mA
- Battery: built in
- Factory firmware: LilyGo test program
- Deep-Sleep Current Consumption: 10–40 µA
- Shutdown Current Consumption: < 1 µA
- Bus Interfaces: UART, SPI, TWI, PDM, I2S, QSPI
- Vibration Motor: integrated
- Package Dimensions: 115 × 75 × 25 mm
- Gross Weight: 60 g
Contents:
- 1× LilyGo T-Impulse Plus 868MHz LoRa SX1262 GPS Tracker
- 1× Lanyard with snap hook
- 1× USB cable USB-A to USB-C
Safety and disposal instructions
Charge only with a suitable charger. Do not short-circuit, open, damage or heat the battery above 60 °C. Keep out of reach of children. Do not use if damaged or deformed.
Disposal: Batteries and accumulators do not belong in household waste. Free return to us or any sales point – see Return & Disposal.
LilyGo T-Impulse Plus 868MHz LoRa SX1262 GPS Tracker
- Brand: Lilygo
- Product Code: 426002
- Availability: Out Of Stock
-
CHF57.90
- Ex Tax: CHF53.56
Related Products
LilyGo TTGO T-Beam ESP32 868MHz LoRaWAN NEO-M8N GPS Board
The LilyGo T-Beam is a development board with the ESP32 (Wi-Fi and Bluetooth), the SX1262 LoRa chip ..
CHF56.90 Ex Tax: CHF52.64
LilyGo T-Echo TTGO Meshtastic 868MHz
The LilyGo T-Echo is a compact device with enclosure for Meshtastic and other LoRa applications. It ..
CHF68.90 Ex Tax: CHF63.74
LilyGo T-Beam SUPREME Meshtastic ESP32-S3 868mhz Lora Module with GPS
The LilyGo T-Beam SUPREME is an advanced Lora development board from LILYGO. It is equipped with an ..
CHF59.90 Ex Tax: CHF55.41
LilyGo T-Watch S3 Smartwatch ESP32-S3 with 868Mhz Lora
Discover the innovative LilyGo T-Watch S3, the perfect smartwatch for developers and tech enthusiast..
CHF59.90 Ex Tax: CHF55.41
SenseCAP GPS Tracker T1000-E for Meshtastic
With the SenseCAP GPS Tracker T1000-E, you have a powerful and compact companion for precise locatio..
CHF49.90 Ex Tax: CHF46.16
LilyGo T-Watch S3 Plus Smartwatch with ESP32-S3 and 868 MHz LoRa
The LilyGO T-Watch S3 Plus is a powerful smartwatch platform with an integrated 868 MHz LoRa module ..
CHF69.90 Ex Tax: CHF64.66
LILYGO TTGO T-Lora Pager ESP32-S3 868mhz IPS LCD
The LilyGO T-LoRa Pager K257 is an innovative handheld device based on the ESP32-S3, integrating mod..
CHF89.90 Ex Tax: CHF83.16
LilyGo T-Echo TTGO Meshtastic 868MHz with BME280 Sensor
This is a LoRaWAN APRS Tracker from LilyGo with an integrated BME280 sensor. The T-Echo is a continu..
CHF74.90 Ex Tax: CHF69.29
WisMesh Day GPS Tracker Meshtastic IP66
The WisMesh Tag is a compact GPS tracker for the Meshtastic network, ideal for outdoor use thanks to..
CHF45.90 Ex Tax: CHF42.46
ThinkNode M3 Tracker Card Meshtastic with GPS WiFi BLE 868MHz
The ThinkNode M3 by Elecrow is a compact Meshtastic tracker in card format that combines high-precis..
CHF41.90 Ex Tax: CHF38.76
Heltec Wireless Tracker V2 ESP32-S3 LoRa GPS 868MHz
The Heltec Wireless Tracker V2 is a compact development board based on the ESP32-S3FN8 microcontroll..
CHF29.90 Ex Tax: CHF27.66
SenseCAP MeshTracker X1 GPS Tracker for Meshtastic
The SenseCAP MeshTracker X1 for Meshtastic is a card-sized GPS tracker for off-grid communication vi..
CHF55.90 Ex Tax: CHF51.71
Tags: LilyGo, T-Impulse, nRF52840, LoRa, SX1262, GPS, GNSS, 868MHz, Wearable, Bluetooth, OLED, MeshCore, Tracker, Meshtastic, Arduino

















