LilyGo T-Beam SUPREME Meshtastic ESP32-S3 868mhz Lora Module with GPS

The LilyGo T-Beam SUPREME is an advanced Lora development board from LILYGO. It is equipped with an ESP32-S3 dual-core microprocessor, LoRa SX1262, and GPS L76K chip. The board is ideal for IoT projects and offers a wide range of application possibilities. It supports 2.4GHz Wi-Fi and Bluetooth 5 (LE). The board comes with 8MB flash and 8MB PSRAM, which is more than sufficient for most applications. On the back, a 18650 battery compartment is already pre-installed to enable autonomous operation. With its LoRa functionality, it is ideal for projects that require a long range. Additionally, it is excellent for use with Meshtastic, an open, decentralised mesh network.

Recommended Accessories: 

• Li-Ion Battery 3.7V 3200mA NCR18650B 18650

Features: 

• EU868MHz LoRaWAN 
• GPS, Bluetooth, and WiFi Connectivity 
• Oled Display and TF Card
• Pre-installed 18650 battery compartment and AXP192 battery management 
• SPI Interface 
• Power and Reset Buttons

Application Examples

• Long-range IoT projects
• Remote monitoring systems
• Location services
• Meshtastic Network: Ideal for open, decentralised mesh networks that run on cost-effective, power-saving devices.

Documentation: 

• Github
• Meshtastic T-Beam Supreme

Technical Specifications:

• Manufacturer: Lilygo 
• Manufacturer SKU: H661
• Input Voltage: 5V USB / 3.7-4.2V Battery
• MCU: ESP32-S3FN8 Dual-Core LX7 Microprocessor
• Wireless Connectivity: 2.4GHz Wi-Fi & Bluetooth 5 (LE) & Lora 868Mhz
• Flash Memory: 8MB
• PSRAM: 8MB
• IMU Sensor: QMI8658
• Development Platforms: Arduino, PlatformIO-IDE, Micropython
• GPS Module: L76K 
• Battery Chip: AXP192 
• LoRa Chip: SX1262 
• LoRa Frequency: 868MHz 
• Transmission: +20dBm 
• Reception: -139dBm@LoRa &62.5Khz&SF=12&146bps 
• -136dBm@LoRa &125Khz&SF=12&293bps 
• -118dBm@LoRa &125Khz&SF=6&9380bps 
• -123dBm@FSK&5Khz&1.2Kbps 
• Frequency Tolerance: ±15KHz 
• FIFO Memory Space: 64Byte 
• Data Rate:
• 1.2K~300Kbps@FSK
• 0.018K~37.5Kbps@LoRa  
• Modes: FSK, GFSK, MSK, GMSK, LoRa TM, OOK 
• Interface: SPI 
• Baud Rate: 9600 
• Operating Temperature: -40°C – 85°C 
• Dimensions: 114 x 33 x 27mm 
• Weight: 107.4g

Package Includes

• 1x LilyGo T-Beam SUPREME Meshtastic ESP32-S3 868mhz Lora Module with GPS
• 1x 868Mhz Antenna
• 2x 13Pin Header Strips