HUSKYLENS 2 WiFi Module Wireless AI Vision and AIoT

The WiFi module equips the HUSKYLENS 2 AI camera sensor with Wi-Fi 6 in the 2.4 GHz band. It is inserted into a slot inside the HUSKYLENS 2 housing. The HUSKYLENS 2 then transmits camera image and recognition data in real time via WiFi, downloads new AI models from the Model Plaza by QR code without PC and receives firmware updates over WiFi (OTA). According to DFRobot, further functions such as connection to large language models (LLM) and MQTT will follow with firmware updates of the HUSKYLENS 2; the module itself needs no update for this.

Important: Only for the HUSKYLENS 2, not for the first HUSKYLENS. For installation, switch off the HUSKYLENS 2, loosen the four screws on one side and carefully separate housing and board without damaging the buttons. Do not press or pull off the conductive foam on the module, otherwise the antenna performance suffers. If the thermal paste on the main chip is damaged when opening, use the included spare thermal pad.

Recommended Accessories:

• HUSKYLENS 2 AI Image Processing Sensor 6 TOPS

Features:

• Wi-Fi 6 in the 2.4 GHz band
• Camera image and recognition data in real time via WiFi
• New AI models by QR code without PC
• Firmware updates over WiFi (OTA)
• Encryption up to WPA3
• Installation in the slot of the HUSKYLENS 2, WiFi setup in the HUSKYLENS 2 menu

Application Examples:

• Debugging robot projects with live image via WiFi
• AI lessons in the classroom without cables
• Mobile robots with object recognition
• Control and data exchange with the UNIHIKER K10 via WiFi

Documentation:

• Wiki DFRobot TEL0191
• Installation in the housing (DFRobot wiki)
• Connecting HUSKYLENS 2 to WiFi (DFRobot wiki)
• Control and communication via WiFi with UNIHIKER K10 (DFRobot wiki)

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: TEL0191
• WiFi standard: Wi-Fi 6
• Frequency: 2.4 GHz (2412 to 2472 MHz)
• Transmit power: at most 7.83 dBm EIRP
• Data rate: up to 286.8 Mbit/s
• Bandwidth: 20/40 MHz
• Encryption: WEP, WPA, WPA2, WPA3
• Interface: USB (edge contact)
• Compatible with: HUSKYLENS 2 (SEN0638)
• Packaging: 68 × 80 × 24 mm
• Gross weight: 12 g

Scope of Delivery:

• 1× HUSKYLENS 2 WiFi module
• 1× Spare thermal pad