Heating cartridge 24V 60W repair kit

This repair set includes a 24V 60W heating cartridge from Creality and two copper connection sleeves each with a piece of shrink tubing. To replace the heating cartridge, simply cut off the wires with side cutters and strip a little, then feed the ends of the cables into the copper sleeve and press together with pliers. Then, heat the shrink tubing with a hot air hairdryer until it has shrunken.  

WARNING: Always push the shrink tubing over the cable before pressing the sleeve together.  

Info: The heating cartridge can also be used on other 3D printers. Just check the voltage, power, cable length and connection.

Recommended Accessories: 

• 50 Piece Shrink Tubing Connector Set 0.25-6mm²

Compatible with the following 3D printers:

• CR-5060 Pro 
• CT-380 
• CR-3040Pro 
• CR-30 
 

Technical Details:

• Manufacturer: Creality  
• Manufacturer SKU: 4004060032 
• Type: 24V_60W_6x20_L1500 
• Voltage: 24V 
• Power: 60W 
• Length: 1500mm 
• Diameter: 6mm 
• Weight: 36.8g 

Package Includes:

• 1x 24V 60W Heating Cartridge
• 2x Copper Sleeve
• 2x Shrink Tubing