Hard Tough Resin Gray 500g UV 405nm eSun

eSun's High Trough Resin is a resin with high physical strength, high hardness and high toughness, similar to ABS filament. This resin is suitable for printing stable and mechanically stressed 3D parts such as gears, brackets, buckles, closures or other mechanical parts. Esun is one of the largest manufacturers of high quality resin used for 3D printing.

Recommended Accessories:

• Nitrile Protective Gloves L 100 Pack
• Creality Resin Filter 20 Pieces
• 1 Liter Isopropyl Alcohol / Isopropanol 99.8%

Characteristics Hard Tough Resin:

• Specifically designed for LCD/LED SLA printers to achieve the best print quality
• Hard Tough Resin is compatible with all LCD printers with 405nm wavelength
• High hardness and scratch resistance of 81D (Shore)
• Excellent mechanical properties such as hardness, tensile, bending and impact resistance
• Very high surface hardness and wear resistance
• Faster print speed
• High precision in printing
• Very good moisture resistance
• Long durability as the resin is delivered in lightproof aluminum bottles

Application, important information:

• Shake before use. Not too tight, so that no air bubbles form. Avoid direct sunlight during application.
• Keep the resin away from children.
• Wear gloves before use to avoid direct contact with the skin.
• Ventilate the room well.
• In case of accidental contact with the skin: Immediately wash with plenty of water.
• Finished printed models must be cleaned with high-concentration alcohol (>95%) for about 30 seconds.

Recommended printing parameters:

• The exposure times are recommendations and may vary from printer to printer.
• Applicable wavelength: 395-405nm
• Optimal print temperature: 18-35°C
• Exposure time first layers: 30-45s
• Exposure time normal layers: 8s

Download:

• Safety Data Sheet

Technical Details:

• Type: Hard Tough Resin
• Color: Gray
• Storage temperature: 15°C to 35°C
• Resin weight: 500g
• Solidification wavelength: 395nm to 405nm
• Density (g/cm3): 1.1 - 1.15
• Viscosity (25°C, MPa s): 200-300
• Flexural strength (Mpa): 70-80
• Flexural modulus (Mpa): 1300-1400
• Tensile strength (Mpa): 55-60
• Tear elongation (%): 30-50
• Hardness (D): 81
• IZOD Impact Resistance (J/m): 67-100

Included in delivery:

• 1x Hard Tough Resin Gray 500g UV 405nm eSun