Hard Tough Resin Blue 500g UV 405nm eSun

The High Trough Resin from eSun is a resin with high physical strength, high hardness, and high toughness, similar to ABS filament. This resin is suitable for printing stable and mechanically stressed 3D parts such as gears, brackets, buckles, closures or other mechanical parts. eSun is one of the largest manufacturers of high-quality resin used for 3D printing.

Recommended Accessories:

• Nitrile Protective Gloves L 100 pack
• Creality Resin Filter 20 pieces

Hard Tough Resin Features:

• Specially developed for LCD/LED SLA printers to achieve the best print quality
• Hard Tough Resin is compatible with all LCD printers with a 405nm wavelength
• High hardness and scratch resistance of 81D (Shore)
• Excellent mechanical properties such as hardness, tension, bending, and impact resistance
• Very high surface hardness and wear resistance
• Faster print speed
• High precision when printing
• Very good moisture resistance
• Long-lasting, as the resin is delivered in light-tight aluminum bottles

Application, Important Information:

• Shake before use. Not too tightly, so as not to produce air bubbles. Avoid direct sunlight during application.
• Keep the resin away from children.
• Wear gloves before using to avoid direct contact with the skin.
• Ventilate the room well.
• In case of accidental contact with the skin: Wash immediately with plenty of water.
• Finished printed models must be cleaned with high-concentration alcohol (>95%) for about 30 seconds.

Recommended Print Parameters:

• Exposure times are recommendations and may vary from printer to printer.
• Applicable wavelength: 395-405nm 
• Optimal printing temperature: 18-35°C
• Exposure time first layers: 30-45s
• Exposure time Normal layers: 8s

Download:

• Safety data sheet

Technical Details:

• Type: Hard Tough Resin
• Color: Blue
• Storage temperature: 15°C - 35°C
• Weight of resin: 500g
• Solidification wavelength: 395nm - 405nm
• Density (g/cm3): 1.1 - 1.15 
• Viscosity (25°C, MPa s): 200-300
• Flexural strength (Mpa): 70-80
• Flexural modulus (Mpa): 1300-1400
• Tensile strength (Mpa): 55-60
• Tear elongation (%): 25-35
• Hardness (D): 81
• IZOD Impact Strength (J/m): 67-100

Package Content:

• 1x Hard Tough Resin Blue 500g UV 405nm eSun