Gravity Ring 2D QR Code Scanner GM60

The DFRobot Gravity Ring 2D QR Code Scanner reads common 1D barcodes and 2D codes such as QR Code, Data Matrix and PDF417. The GM60 reading module sits in a metal housing with thread and nut for mounting in a front panel, and a coloured light ring shows the reading status. The scanner is connected to Arduino, ESP32 or Raspberry Pi via I2C or UART through the adapter board, selected with a slide switch.

Note: The connection cable can be converted to male pins with a Dupont cable M-M, so that it also fits an Arduino UNO.


Recommended Accessories:


Features:

  • Reads 1D codes (EAN-13, EAN-8, UPC-A, UPC-E, Code 128, Code 39, Code 93, Codabar, Interleaved 2 of 5) and 2D codes (QR Code, Data Matrix, PDF417)
  • Metal housing with thread and nut for mounting
  • Coloured light ring, green flashing on successful reading
  • I2C or UART, selected with a slide switch on the adapter board
  • 4-pin Gravity connector, operation at 3.3 V and 5 V
  • Arduino library DFRobot_GM60 with examples

Application Examples:

  • Vending and dispensing machines
  • Access control and turnstiles
  • Payment and ticket terminals
  • Storage, inventory and workshop projects with barcodes

Documentation:


Technical Data:

  • Manufacturer: DFRobot
  • Manufacturer SKU: SEN0486
  • Reading module: GM60
  • Supply: 3.3 V or 5 V DC
  • Operating current: below 70 mA
  • Interfaces: I2C (address 0x1A), UART (9600 baud)
  • Image sensor: 640 × 480 pixels
  • Reading range QR Code: 25 to 150 mm, depending on code and environment
  • Contrast: at least 25 %
  • Reading resolution: from 5 mil
  • Reading angle: roll 360°, pitch ±55°, yaw ±55°
  • Field of view: 69° horizontal, 56° vertical
  • Ambient light: 0 to 100000 lx
  • Operating temperature: -20 °C to 60 °C
  • Storage temperature: -40 °C to 80 °C
  • Humidity: 5 to 95 % RH, non-condensing
  • Adapter board connection: 4-pin Gravity (SDA/TX, SCL/RX, GND, VCC)
  • Housing thread: M25
  • Scanner dimensions: Ø 25 × 15 mm
  • Weight: 39 g

Scope of Delivery:

  • 1× Ring 2D QR Code Scanner GM60
  • 1× adapter board
  • 1× 4-pin Gravity cable 30 cm (PH2.0 to Dupont female)

Write a review

Note: HTML is not translated!
    Bad           Good

Gravity Ring 2D QR Code Scanner GM60

  • Brand: DFRobot
  • Product Code: 422099
  • Availability: In Stock
  • CHF54.90

  • Ex Tax: CHF50.79

Related Products

1D/2D Barcode Scanner Reader Module

1D/2D Barcode Scanner Reader Module

This small barcode and QR code scanner from Waveshare reads 1D and 2D codes from paper or screen. It..

CHF49.00 Ex Tax: CHF45.33

Dupont Cables M-M 10cm 20 Pieces

Dupont Cables M-M 10cm 20 Pieces

Dupont cables are used to connect components quickly. They are also known as jumper cables, test cab..

CHF1.90 Ex Tax: CHF1.76

GM65 QR Barcode Scanner Module

GM65 QR Barcode Scanner Module

The GM65 scanner module from DFRobot reads 1D barcodes and 2D codes such as QR code, Data Matrix and..

CHF54.90 Ex Tax: CHF50.79

Barcode QR-Code Scanner Module (C)

Barcode QR-Code Scanner Module (C)

The scanner module is a barcode and QR code scanner that can quickly and accurately decode the 1D or..

CHF55.90 Ex Tax: CHF51.71

Round 2D Barcode/QR Code Scanner Module (D)

Round 2D Barcode/QR Code Scanner Module (D)

The Barcode/QR-code scanner module (D) presents itself as a round 2D barcode scanner module with an ..

CHF29.90 Ex Tax: CHF27.66

M5Stack QR Code Scanner Unit STM32F030

M5Stack QR Code Scanner Unit STM32F030

The M5Stack QR Code Scanner Unit STM32F030 revolutionizes the way you can capture QR codes and barco..

CHF21.90 Ex Tax: CHF20.26

M5Stack QR Code Scanner Module 13.2

M5Stack QR Code Scanner Module 13.2

With the M5Stack QR Code Scanner Module 13.2, you can quickly turn your M5Core into a reliable 1D/2D..

CHF24.90 Ex Tax: CHF23.03

M5Stack Atomic Barcode/QR Code Scanner 2 Base

M5Stack Atomic Barcode/QR Code Scanner 2 Base

The Atomic QRCode2 Base from M5Stack is a compact 1D/2D barcode scanner specifically designed for th..

CHF19.90 Ex Tax: CHF18.41

Tags: QR, Code, GROW, GM60, Scanner, Barcode, 1D, 2D, QR-code, Gravity, Module, I2C, UART, Metal, Housing, Thread, M25, DFRobot, EAN13, EAN8, UPCA, UPCE0, UPCE1, Code128, Code39, Code93, CodeBar, Data, Matrix, PDF417, GM60, SEN0486