Gravity Digital 5A Relay Module
The DFRobot relay module is a standard relay that is controlled by a microcontroller to switch larger consumers such as pumps, solenoid valves, lamps, motors or lamps. The relay has a status LED to visually display its ON or OFF switching state. The relay is controlled via the digital IO port. The relay module can be operated with 3.3V or 5V microcontrollers. You can also use it for the Raspberry Pi or ESP.
For safety reasons, you should only operate the relays up to 30V, since the back of the PCB is not isolated and can be dangerous if carelessly handled with 230V.
Documentation:
Technical Details:
- Number of channels: 1
- Rated Pass-through Current: 10A (NO) 5A (NC)
- Maximum switching voltage: 150VAC 24VDC
- Interface: Digital
- Control signal: TTL-Level
- Switching Power (Res. Load): 10A 250VAC / 24VDC
- Max. Switching voltage 250VAC / 30VDC
- Dimension: 38 x 33 x 20mm
- Weight: 25g
Scope of Delivery:
- 1x Gravity MOSFET driver module 10A
- 1x Gravity 3pin digital sensor cable PH2.0 to XH2.54
Gravity Digital 5A Relay Module
- Brand: DFRobot
- Product Code: 421668
- Availability: In Stock
-
CHF6.90
- Ex Tax: CHF6.38
Related Products
2-Channel Relay Module 5V
With this 2-channel relay module, you can easily control large loads with the 5V of your Arduino or ..
CHF6.90 Ex Tax: CHF6.38
1-Channel Solid State Relay Module
This solid state relay is perfect for Arduino if you want to switch loads. Solid state relays, in Ge..
CHF4.90 Ex Tax: CHF4.53
1-Channel Relay Module
With this 1-channel relay module, you can easily control large loads with 5V from your Arduino or Ra..
CHF5.50 Ex Tax: CHF5.09
M5Stack 3A Relay Unit
The 3A Relay is an M5Unit, in which a relay function has been implemented. With this 1-channel relay..
CHF5.90 Ex Tax: CHF5.46
Gravity MOSFET Driver Module 10A
With the Gravity MOSFET driver module, you can control large currents up to 20A with your microcontr..
CHF6.90 Ex Tax: CHF6.38
Electromechanical spindle lock 12V DC with tab
This is a high-quality electric magnetic lock with a steel housing. The lock is easy to install and ..
CHF16.90 Ex Tax: CHF15.63
Electromagnetic Lock 12V DC
This electromagnetic 12V lock is controlled via two control lines (red: +, black: -). Switch the ele..
CHF13.90 Ex Tax: CHF12.86
Gravity 16A Relay Module 3.3-5V Logic Compatible
This is a 16A relay from DFRrobot. The relay module was specially developed for low voltage devices ..
CHF12.90 Ex Tax: CHF11.93
Gravity 10A Relay Module 3.3-5V Logic Compatible
This is a 10A relay from DFRrobot. The relay module was specifically developed for low voltage devic..
CHF8.90 Ex Tax: CHF8.23
5-30V Trigger Time Relay Module with USB
With this timer relay, you can set a delay from 0.1sec to 999min before the module turns on or off. ..
CHF8.90 Ex Tax: CHF8.23
Gravity Magnetic Lock Relay 3.3V-5V
The DFRobot Gravity magnetic latching relay is a powerful and silent relay, compatible with most com..
CHF10.90 Ex Tax: CHF10.08
Gravity Easy Relay Module with DC Barrel Jack 5.5mm / 2.1mm
The Gravity Easy Relay Module with DC Barrel Jack simplifies the control of electronic devices and p..
CHF11.90 Ex Tax: CHF11.01
Gravity: D3 Kit - A Comprehensive Kit for Education
The Gravity: D3 Kit from DFRobot is specially designed for schools and teaching staff to provide a c..
CHF289.00 Ex Tax: CHF267.35
Gravity: Advanced Kit for Arduino
The Gravity: Advanced Kit for Arduino from DFRobot is ideal for getting started in the world of elec..
CHF94.50 Ex Tax: CHF87.42
Tags: Relay, Module, 1-Channel, Switching, Arduino, Raspberry, Breakout, Relays, Relay, Electromechanical, Contactor, Mechanical, 3.3V, 5V, DFrobot, DFR0017