Gravity Arduino Zero to Hero Kit

The Gravity Arduino Zero to Hero Kit from DFRobot combines an Arduino learning set with an online course by the Australian robotics engineer and teacher Sanjin Dedić. In more than 30 lessons the course leads from LED, button and voltage divider to logic gates, light instrument, sound-activated switch, RGB color mixing, reaction time measurement, IR remote control, motion sensing with the MPU6050 and data logging to an SD card. The hardware includes a DFRduino UNO R3, a breadboard with acrylic holder, components and Gravity modules with IO Expansion Shield.

The kit contains a code for the online course. Enter the code at robotix.com.au/#/course, after which access to the course opens. Register right away, as the link is only valid for one hour.

Features:

• DFRduino UNO R3, compatible with the Arduino IDE
• Online course with more than 30 lessons, from simple circuits to projects with sensors
• Breadboard with 400 points, resistors, LEDs, buttons and potentiometers
• Gravity IO Expansion Shield with sound sensor, speaker module and PIR motion sensor
• 6 DOF sensor MPU6050 and microSD card module

Application Examples:

• Arduino and electronics lessons
• Self-study from the basics to own projects
• Projects such as light instrument, reaction game or data logger

Documentation:

• Course access with the code from the kit (Robotix)
• Arduino Zero to Hero online course (Udemy)
• DFRobot product page KIT0133

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: KIT0133
• Microcontroller: DFRduino UNO R3
• Power: 5 V via USB
• Dimensions: 220 × 165 × 65 mm
• Weight: 640 g

Scope of Delivery:

• 1× DFRduino UNO R3
• 1× USB cable A-B
• 30× jumper cables M/M
• 10× jumper cables F/M
• 20× resistor 220 Ω
• 20× resistor 1 kΩ
• 20× resistor 4.7 kΩ
• 20× resistor 10 kΩ
• 10× LED 5 mm
• 1× IR receiver diode
• 4× mini push buttons
• 1× ambient light sensor PT5I850AC
• 1× photoresistor GL5528
• 1× transistor 2N3904
• 1× tilt switch
• 1× 8-segment LED display
• 1× LM35 temperature sensor
• 1× buzzer
• 3× potentiometer 10 kΩ
• 1× mini remote control with CR2025 coin cell
• 1× breadboard 400 points
• 1× acrylic holder for Arduino and breadboard
• 1× Gravity IO Expansion Shield for Arduino V7.1
• 1× Gravity Analog Sound Sensor
• 1× Gravity Digital Speaker Module
• 1× Gravity Digital PIR Motion Sensor
• 1× 6 DOF sensor MPU6050
• 1× microSD card module

Safety and Disposal Instructions

This battery is non-rechargeable and should not be charged. Do not short-circuit, open or heat. Keep out of reach of children - especially button cells can cause serious injuries if swallowed; in this case, seek medical help immediately.

Disposal: Batteries do not belong in household waste. Free return to us or any point of sale - see details Return & Disposal.