Arduino Create Your UNO Kit

The original Arduino Make Your UNO Kit is an educational tool that aids you in learning about electronics and soldering. It includes all the components needed to construct an Arduino UNO and an Audio Synthesizer Shield. The instructions and video materials are included on a dedicated platform that features a 3D interactive viewer, making it easy to follow the steps for the kit's assembly. Once assembled, the kit can be used to build a synth and unleash your creativity. With the Make Your UNO Kit, you will not only learn the basics of electronics and soldering, but also get a chance to put your newfound knowledge into practice and create your own music. 

Documentation: 

• Interactive 3d Instructions
• Arduino IDE Download
• Documentation for the Arduino Make Your UNO Kit

Technical Details: 

• Manufacturer: Arduino 
  
• Manufacturer SKU: AKX00037 
  
• Audio Synth Shield 
  
• Speaker Resistance: 8ohm 
  
• Trimmer: 6x (Control various audio signal parameters) 
  
• Mono Amplifier: 1x 
  
• Arduino UNO 
  
• Microcontroller: ATmega328P 
  
• USB Serial Processor: ATmega16U2 
  
• ATmega328P Flash Memory: 32 KB (0.5 KB used by the bootloader) 
  
• ATmega328P SRAM: 2 KB 
  
• ATmega328P EEPROM: 1 KB 
  
• Clock Frequency: 16 MHz (ATmega328P & ATmega16U2) 
  
• Operating Voltage: 5V 
  
• Input Voltage (recommended): 7-12V 
  
• Input Voltage (limits): 6-20V 
  
• DC Current per I/O Pin: 20 mA 
  
• DC Current for 3.3V Pin: 50 mA 
  
• Serial Communication Interfaces: 1x UART, 1x SPI, 1x I2C 
  
• Digital I/O Pins: 14 
  
• LED_BUILTIN: Pin 13 
  
• PWM Channels: 6 
  
• Analog Input Channels: 6 
  
• USB: USB B 2.0 
  
• Size: 65.4 x 142.10 x 15.4mm 
  
• Weight: 44g 

Package includes: 

• Arduino Make Your UNO:
  • 1 x Make Your UNO Board 
  • 1 x USB C Serial Adapter Board 
  • 7 x 1k Ohm Resistors 
  • 2 x 10k Ohm Resistors 
  • 2 x 1M Ohm Resistors 
  • 1 x Diode (1N4007) 
  • 1 x 16MHz Quartz Circuit 
  • 4 x Yellow LEDs 
  • 1 x Green LED 
  • 1 x Push Button 
  • 1 x MOSFET 
  • 1 x LDO (3.3V) 
  • 1 x LDO (5V) 
  • 3 x Ceramic Capacitors (22pF) 
  • 3 x Electrolytic Capacitors (47uF) 
  • 7 x Polyester Capacitors (100nF) 
  • 1 x Socket for ATmega 328p 
  • 2 x I/O Connectors  
  • 1 x 6-pin Connector Strip 
  • 1 x Barrel Jack Plug 
  • 1 x ATmega 328p Microcontroller 
• Arduino Audio Synthesizer:
  • 1 x Audio Synth PCB  
  • 1 x 100k Ohm Resistor 
  • 1 x 10 Ohm Resistor 
  • 1 x Audio Amplifier (LM386) 
  • 1 x Ceramic Capacitor (47nF) 
  • 1 x Electrolytic Capacitor (47uF) 
  • 1 x Electrolytic Capacitor (220uF) 
  • 1 x Polyester Capacitor (100nF) 
  • 4 x Connector Pin Headers  
  • 6 x 10k Ohm Potentiometers with Plastic Knobs 
• Spare Parts:
  • 2 x Electrolytic Capacitors (47uF) 
  • 2 x Polyester Capacitor (100nF) 
  • 2 x Ceramic Capacitors (22pF) 
  • 1 x Push Button 
  • 1 x Yellow LED 
  • 1 x Green LED 
  • Mechanical Parts 
  • 5 x 12mm Spacers 
  • 11 x 6mm Spacers 
  • 5 x Screw Nuts 
  • 2 x 12mm Screws