Gravity 2-Channel 15Bit 0-10V ADC Module
The DFRobot Gravity module measures two voltages from 0 to 10 V with the ADS1115 from Texas Instruments, the resolution is 0.3125 mV, the measurement error ±2 mV. It connects industrial sensors with 0-10 V output, such as pressure transmitters, flow or wind meters, directly to Arduino, ESP32 or Raspberry Pi. A switch selects between I2C and UART.
For four channels up to 5 V: Gravity 16Bit 4-Channel ADC Analog Digital Converter I2C ADS1115
Note: The connection cable can be converted to male pins with a Dupont cable M-M, so that it also fits an Arduino UNO.
Recommended Accessories:
Features:
- Two inputs AIN1 and AIN2 against common GND, each 0 to 10 V, on a 3-pin screw terminal
- Resolution 0.3125 mV (15 bit over 0 to 10 V), measurement error ±2 mV
- I2C or UART via switch; I2C address with A0 and A1 from 0x48 to 0x4B, default 0x48
- UART at 9600 bit/s with command table in the wiki
- 4-pin Gravity connector: D/T (SDA or TX), C/R (SCL or RX), GND, VCC
- Supply 3.3 V to 5 V
- Arduino library DFRobot_ADS1115_0_10V
Application Examples:
- Read pressure transmitters and level sensors with 0-10 V output
- Wind and flow meters in weather stations
- Capture voltage signals from energy meters or inverters
- Building and industrial automation with Arduino or ESP32
Documentation:
- Wiki DFRobot DFR1184 with example code for I2C and UART
- Library DFRobot_ADS1115_0_10V on GitHub
- Schematic (PDF)
Technical Data:
- Manufacturer: DFRobot
- Manufacturer SKU: DFR1184
- ADC chip: ADS1115
- Supply voltage: 3.3 V to 5 V DC
- Measuring range: 0 V to 10 V
- Channels: 2
- Resolution: 0.3125 mV (15 bit)
- Measurement error: ±2 mV
- Interface: I2C (0x48 to 0x4B) or UART (9600 bit/s)
- Connections: D/T, C/R, GND, VCC; terminal AIN1, AIN2, GND
- Operating temperature: -30 °C to 80 °C
- Dimensions: 32 × 38 × 15 mm
- Weight: 18 g
Scope of Delivery:
- 1× Gravity 2-Channel 15Bit 0-10V ADC Module
- 1× Gravity cable 4-pin for I2C and UART
Gravity 2-Channel 15Bit 0-10V ADC Module
- Brand: DFRobot
- Product Code: 424938
- Availability: In Stock
-
CHF12,90
- Ex Tax: CHF11,93
Related Products
Dupont Cables M-M 10cm 20 Pieces
Dupont cables are used to connect components quickly. They are also known as jumper cables, test cab..
CHF1,90 Ex Tax: CHF1,76
Gravity 16Bit 4-Channel ADC Analog Digital Converter I2C ADS1115
The DFRobot Gravity ADC module measures four analog signals with the 16-bit ADS1115 converter and pa..
CHF19,90 Ex Tax: CHF18,41
Gravity IO Expansion Shield for Arduino V7.1
The Gravity IO Expansion Shield V7.1 from DFRobot brings all pins of an Arduino UNO out to coloured ..
CHF11,90 Ex Tax: CHF11,01
Gravity I2C 2-Channel DAC Module 0-10V
The Gravity module from DFRobot with the GP8403 converts values via I2C into two analog voltages of ..
CHF11,90 Ex Tax: CHF11,01
M5Stack DAC2 I2C Unit GP8413 Digital-Analog Converter
Transform digital signals into precise analog outputs with the M5Stack DAC2 I2C Unit GP8413. This mo..
CHF8,90 Ex Tax: CHF8,23
Gravity I2C Address Changer
The DFRobot address shifter uses the LTC4316 to translate the I2C address of a connected sensor in h..
CHF9,90 Ex Tax: CHF9,16
M5Stack ADC I2C Unit ADS1110 Analog‑Digital‑Converter V1.1
The M5Stack ADC I2C Unit V1.1 is a compact measuring module that utilizes the 16-bit analog-to-digit..
CHF8,90 Ex Tax: CHF8,23
Tags: DFRobot, Gravity, ADC, 0-10V, 15Bit, DFR1184, ADS1115, I2C, UART, Analog, Sensor, Module, Automation, Environment, Smart Home, Monitoring, analog-to-digital converter












