PLA+HS Firefighter Red High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Firefighter Red. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.

More colours PLA+HS:
                                                               


Recommended Accessories:


Features:

  • Made for fast printing: up to 350 mm/s, a speed rarely used in practice
  • Flows more easily than standard PLA+ at high speed
  • Good layer adhesion even at high speed, according to eSun
  • Tough, does not break easily according to eSun
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Enclosures and mounts for electronics
  • Several identical parts where print time matters
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 350 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+HS (PLA+ for high print speed)
  • Colour: Firefighter Red
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 54 °C (0.45 MPa)
  • Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
  • Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
  • Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
  • Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
  • Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
  • Acid and alkali resistant: no
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+HS filament Firefighter Red, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+HS Firefighter Red High Speed Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 423220
  • Availability: In Stock
  • CHF16.90

  • Ex Tax: CHF15.63

Related Products

PLA+ Red Filament 1.75mm 1Kg eSun

PLA+ Red Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Firefighter Red Filament 1.75mm 1Kg eSun

PLA+ Firefighter Red Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Red Transparent Filament 1.75mm 1Kg eSun

PLA Red Transparent Filament 1.75mm 1Kg eSun

The eSUN PLA Red Transparent Filament is a high-quality, environmentally friendly, and user-friendly..

CHF17.90 Ex Tax: CHF16.56

PLA Matte Strawberry Red Filament 1.75mm 1Kg eSun

PLA Matte Strawberry Red Filament 1.75mm 1Kg eSun

ePLA-Matte Strawberry Red is a PLA-based filament from eSun. The ePla-Matte series from eSun combine..

CHF10.90 Ex Tax: CHF10.08

PLA+HS Red High Speed Filament 1.75mm 1Kg eSun

PLA+HS Red High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA Hyper Red Filament 1.75mm 1Kg Creality

PLA Hyper Red Filament 1.75mm 1Kg Creality

The Creality PLA Hyper Filament allows you ultra-fast printing speeds of up to 600 mm/s, significant..

CHF17.90 Ex Tax: CHF16.56

PLA+ RGB Red Filament 1.75mm 1Kg eSun

PLA+ RGB Red Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Basic Fire Red Refill Filament 1.75mm 1Kg eSun

PLA Basic Fire Red Refill Filament 1.75mm 1Kg eSun

Are you looking for high-quality filament for your 3D printer that is reliable, eco-friendly, and co..

CHF11.40 Ex Tax: CHF10.55

PLA Hyper RFID Red Filament 1.75mm 1Kg Creality

PLA Hyper RFID Red Filament 1.75mm 1Kg Creality

With Creality's PLA Hyper RFID Filament, you can experience 3D printing in a new dimension. This spe..

CHF22.90 Ex Tax: CHF21.18

PolyTerra PLA Lava Red Filament 1.75mm 1Kg

PolyTerra PLA Lava Red Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that provides reliable results for both beginners and..

CHF14.90 Ex Tax: CHF13.78

HT-PLA Red Filament 1.75mm 1Kg Polymaker

HT-PLA Red Filament 1.75mm 1Kg Polymaker

Polymaker HT-PLA is a very easy-to-print high-temperature filament that provides reliable results fo..

CHF21.90 Ex Tax: CHF20.26

Panchroma PLA Wine Red Filament 1.75mm 1Kg

Panchroma PLA Wine Red Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and is suit..

CHF18.90 Ex Tax: CHF17.48

Panchroma PLA Red Filament 1.75mm 1Kg

Panchroma PLA Red Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and is suit..

CHF18.90 Ex Tax: CHF17.48

PLA+HS Brick Red High Speed Filament 1.75mm 1Kg eSun

PLA+HS Brick Red High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS RGB Red High Speed Filament 1.75mm 1Kg eSun

PLA+HS RGB Red High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

Tags: Esun, ePLA+HS, Speed, affordable, Filament, High, Flow, PLA, 3D printing, printing speed, print quality, melting properties, Rapid, Prototyping, environmentally friendly, 1.75, Printer, 3D Printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, inexpensive, 1.75mm, Red, Fire Department.