PLA+HS Yellow High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Yellow. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.
Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.
Recommended Accessories:
- Filament dryers (dry box): all models in our shop
- Filament Vacuum Set Pro 3 eVacuum by eSun
- 5 Pcs. Filament Vacuum Bags Pro 3 from eSun
- 1 Liter Isopropyl Alcohol/Isopropanol 99.8%
Features:
- Made for fast printing: up to 350 mm/s, a speed rarely used in practice
- Flows more easily than standard PLA+ at high speed
- Good layer adhesion even at high speed, according to eSun
- Tough, does not break easily according to eSun
- Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
- If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
- Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
- Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
- Vacuum-packed with desiccant
Application Examples:
- Prototypes and functional samples
- Enclosures and mounts for electronics
- Several identical parts where print time matters
- Models, figures and decoration
Documentation:
Recommended Print Settings:
- Nozzle temperature: 220 °C (210 to 230 °C)
- Print bed temperature: 55 °C (45 to 60 °C)
- Print bed: PEI
- Part cooling fan: 100 %
- Print speed: slicer's default profile, up to 350 mm/s
Technical Data:
- Manufacturer: eSun
- Material: PLA+HS (PLA+ for high print speed)
- Colour: Yellow
- Filament diameter: 1.75 mm
- Tolerance: ±0.05 mm
- Filament weight: 1 kg
- Density: 1.24 g/cm³
- Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
- Heat deflection temperature: 54 °C (0.45 MPa)
- Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
- Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
- Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
- Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
- Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
- Acid and alkali resistant: no
- Spool: cardboard
- Spool outer diameter: 200 mm
- Spool hole diameter: 55 mm
- Spool width: 62 mm
- Gross weight: 1303 g
Scope of Delivery:
- 1× PLA+HS filament Yellow, 1.75 mm, 1 kg on cardboard spool
PLA+HS Yellow High Speed Filament 1.75mm 1Kg eSun
- Brand: eSUN
- Product Code: 423206
- Availability: In Stock
-
CHF16.90
- Ex Tax: CHF15.63
Related Products
PLA+ Yellow Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA Silk Yellow Filament 1.75mm 1Kg eSun
The eSilk-PLA Yellow was specially developed to provide particularly smooth and shiny surfaces on 3D..
CHF16.90 Ex Tax: CHF15.63
PLA Silk Dark Yellow Filament 1.75mm 1Kg eSun
The eSilk-PLA Dark Yellow has been specifically developed to achieve particularly smooth and shiny s..
CHF13.90 Ex Tax: CHF12.86
PLA Matte Almond Yellow Filament 1.75mm 1Kg eSun
ePLA-Matte Almond Yellow is a PLA based filament from eSun. eSun's ePla-Matte series combines the ex..
CHF13.90 Ex Tax: CHF12.86
PLA Yellow Transparent Filament 1.75mm 1Kg eSun
The eSUN Filament PLA Yellow Transparent is a high-quality, environmentally friendly, and user-frien..
CHF17.90 Ex Tax: CHF16.56
PLA+ CMYK Filament Hueforge Kit 1.75mm 4x1Kg eSun
The PLA+ CMYK Filament Hueforge Kit from eSun offers a versatile and creative way to design your 3D ..
CHF55.90 Ex Tax: CHF51.71
PLA Hyper Yellow Filament 1.75mm 1Kg Creality
The Creality PLA Hyper Filament enables ultra-fast print speeds of up to 600 mm/s, significantly acc..
CHF20.90 Ex Tax: CHF19.33
PLA+ Yellow CMYK Filament Hueforge 1.75mm 1Kg eSun
PLA+ CMYK from eSun is made for Hueforge. The software turns an image into a flat relief of thin col..
CHF14.90 Ex Tax: CHF13.78
PLA+ Almond Yellow Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA+ Yellow Refill Filament 1.75mm 1Kg eSun
Discover the sustainable and high-quality PLA+ Refill Filament from eSun with a 1.75mm diameter – no..
CHF13.50 Ex Tax: CHF12.49
PLA Hyper RFID Yellow Filament 1.75mm 1Kg Creality
With the PLA Hyper RFID filament from Creality, you experience 3D printing in a new dimension. This ..
CHF25.90 Ex Tax: CHF23.96
PLA Basic Yellow Refill Filament 1.75mm 1Kg eSun
Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally fr..
CHF11.40 Ex Tax: CHF10.55
PolyTerra PLA Savannah Yellow Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that enables both beginners and experienced users to ..
CHF14.90 Ex Tax: CHF13.78
HT-PLA Yellow Filament 1.75mm 1Kg Polymaker
Polymaker HT-PLA is a very easy-to-print high-temperature filament that ensures reliable results for..
CHF21.90 Ex Tax: CHF20.26
Panchroma PLA Lemon Yellow Filament 1.75mm 1Kg
The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..
CHF18.90 Ex Tax: CHF17.48
Panchroma PLA Yellow Filament 1.75mm 1Kg
The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and is suit..
CHF18.90 Ex Tax: CHF17.48
HT-PLA Yellow Filament 1.75mm 1Kg R3D
The HT-PLA Yellow Filament by R3D is a high-temperature-resistant PLA filament with a diameter of 1...
CHF19.90 Ex Tax: CHF18.41
Tags: Esun, ePLA+HS, Speed, affordable, Filament, High, Flow, PLA, 3D printing, Printing speed, Print quality, Melting properties, Rapid, Prototyping, environmentally friendly, 1.75, Printer, 3D Printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, inexpensive, 1.75mm, Yellow.























