PLA+HS Very Peri High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Very Peri. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.
Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.
Recommended Accessories:
- Filament dryers (dry box): all models in our shop
- Filament Vacuum Set Pro 3 eVacuum by eSun
- 5 Pcs. Filament Vacuum Bags Pro 3 from eSun
- 1 Liter Isopropyl Alcohol/Isopropanol 99.8%
Features:
- Made for fast printing: up to 350 mm/s, a speed rarely used in practice
- Flows more easily than standard PLA+ at high speed
- Good layer adhesion even at high speed, according to eSun
- Tough, does not break easily according to eSun
- Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
- If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
- Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
- Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
- Vacuum-packed with desiccant
Application Examples:
- Prototypes and functional samples
- Enclosures and mounts for electronics
- Several identical parts where print time matters
- Models, figures and decoration
Documentation:
Recommended Print Settings:
- Nozzle temperature: 220 °C (210 to 230 °C)
- Print bed temperature: 55 °C (45 to 60 °C)
- Print bed: PEI
- Part cooling fan: 100 %
- Print speed: slicer's default profile, up to 350 mm/s
Technical Data:
- Manufacturer: eSun
- Material: PLA+HS (PLA+ for high print speed)
- Colour: Very Peri
- Filament diameter: 1.75 mm
- Tolerance: ±0.05 mm
- Filament weight: 1 kg
- Density: 1.24 g/cm³
- Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
- Heat deflection temperature: 54 °C (0.45 MPa)
- Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
- Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
- Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
- Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
- Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
- Acid and alkali resistant: no
- Spool: cardboard
- Spool outer diameter: 200 mm
- Spool hole diameter: 55 mm
- Spool width: 62 mm
- Gross weight: 1303 g
Scope of Delivery:
- 1× PLA+HS filament Very Peri, 1.75 mm, 1 kg on cardboard spool
PLA+HS Very Peri High Speed Filament 1.75mm 1Kg eSun
- Brand: eSUN
- Product Code: 423225
- Availability: In Stock
-
CHF16.90
- Ex Tax: CHF15.63
Related Products
PLA Silk Purple Filament 1.75mm 1Kg eSun
The eSilk-PLA Violet was specifically developed to achieve particularly smooth and shiny surfaces on..
CHF16.90 Ex Tax: CHF15.63
PLA+ Very Peri Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA Purple Transparent Filament 1.75mm 1Kg eSun
The eSUN Filament PLA Purple Transparent is a high-quality, environmentally friendly and user-friend..
CHF14.90 Ex Tax: CHF13.78
PLA Matte Purple Filament 1.75mm 1Kg eSun
ePLA-Matte Purple is a PLA based filament from eSun. The ePla-Matte series from eSun combines the ex..
CHF16.90 Ex Tax: CHF15.63
PLA+ Lilac Purple Filament 1.75mm 1Kg eSun
PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..
CHF14.90 Ex Tax: CHF13.78
PLA Hyper RFID Very Peri Filament 1.75mm 1Kg Creality
With the PLA Hyper RFID Filament from Creality, you will experience 3D printing in a new dimension. ..
CHF25.90 Ex Tax: CHF23.96
PLA Hyper RFID Purple Filament 1.75mm 1Kg Creality
With the PLA Hyper RFID Filament from Creality, you experience 3D printing in a new dimension. This ..
CHF25.90 Ex Tax: CHF23.96
PLA Basic Grape Violet Filament 1.75mm 1Kg eSun
With eSun's PLA Basic filament, you receive a cost-effective yet high-quality printing material spec..
CHF11.90 Ex Tax: CHF11.01
PLA Basic Grape Purple Refill Filament 1.75mm 1Kg eSun
Are you looking for a high-quality filament for your 3D printer that is reliable, environmentally fr..
CHF11.40 Ex Tax: CHF10.55
PolyTerra PLA Lavender Violet Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that allows both beginners and experienced users to a..
CHF14.90 Ex Tax: CHF13.78
PolyTerra PLA Army Violet Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that allows both beginners and experienced users to a..
CHF14.90 Ex Tax: CHF13.78
PolyTerra PLA Electric Indigo Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that enables reliable results for both beginners and ..
CHF14.90 Ex Tax: CHF13.78
PolyTerra PLA Periwinkle Filament 1.75mm 1Kg
PolyTerra PLA is a very easy-to-print filament that enables both beginners and experienced users to ..
CHF14.90 Ex Tax: CHF13.78
Panchroma PLA Purple Filament 1.75mm 1Kg
Polymaker's Panchroma Basic PLA is a versatile 3D printing filament for everyday use and is suitable..
CHF18.90 Ex Tax: CHF17.48
PLA+HS Lilac Purple High Speed Filament 1.75mm 1Kg eSun
PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..
CHF16.90 Ex Tax: CHF15.63
Tags: Esun, ePLA+HS, Speed, cheap, Filament, High, Flow, PLA, 3D printing, Print speed, Print quality, Melting properties, Rapid, Prototyping, environmentally friendly, 1.75, Printer, 3D printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, affordable, 1.75mm, Purple, Violet, Very, Peri.





















