PLA+HS Soft Blue High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Soft Blue. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.

More colours PLA+HS:
                                                               


Recommended Accessories:


Features:

  • Made for fast printing: up to 350 mm/s, a speed rarely used in practice
  • Flows more easily than standard PLA+ at high speed
  • Good layer adhesion even at high speed, according to eSun
  • Tough, does not break easily according to eSun
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Enclosures and mounts for electronics
  • Several identical parts where print time matters
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 350 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+HS (PLA+ for high print speed)
  • Colour: Soft Blue
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 54 °C (0.45 MPa)
  • Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
  • Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
  • Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
  • Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
  • Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
  • Acid and alkali resistant: no
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+HS filament Soft Blue, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+HS Soft Blue High Speed Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 425556
  • Availability: In Stock
  • CHF16.90

  • Ex Tax: CHF15.63

Related Products

PLA+ Light Blue Filament 1.75mm 1Kg eSun

PLA+ Light Blue Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Space Blue Filament 1.75mm 1Kg eSun

PLA+ Space Blue Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+HS Light Blue High Speed Filament 1.75mm 1Kg eSun

PLA+HS Light Blue High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Space Blue High Speed Filament 1.75mm 1Kg eSun

PLA+HS Space Blue High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA Magic Dark Twinkling Blue Filament 1.75mm 1Kg eSun

PLA Magic Dark Twinkling Blue Filament 1.75mm 1Kg eSun

Experience a magical printing experience with the ePLA-Magic Dark Twinkling Blue Filament. This fila..

CHF19.90 Ex Tax: CHF18.41

PLA Hyper Blue Filament 1.75mm 1Kg Creality

PLA Hyper Blue Filament 1.75mm 1Kg Creality

The Creality PLA Hyper Filament allows you ultra-fast printing speeds of up to 600 mm/s, significant..

CHF20.90 Ex Tax: CHF19.33

PLA Basic Light Blue Filament 1.75mm 1Kg eSun

PLA Basic Light Blue Filament 1.75mm 1Kg eSun

With eSun's PLA Basic Filament, you get a cost-effective yet high-quality printing material specific..

CHF11.90 Ex Tax: CHF11.01

PLA+ Baby Blue Filament 1.75mm 1Kg eSun

PLA+ Baby Blue Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Aqua Filament 1.75mm 1Kg eSun

PLA+ Aqua Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PolyTerra PLA Arctic Teal Turquoise Filament 1.75mm 1Kg

PolyTerra PLA Arctic Teal Turquoise Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that provides reliable results for both beginners and..

CHF14.90 Ex Tax: CHF13.78

Panchroma PLA Aqua Blue Filament 1.75mm 1Kg

Panchroma PLA Aqua Blue Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and suitabl..

CHF18.90 Ex Tax: CHF17.48

PLA+HS Haze Blue High Speed Filament 1.75mm 1Kg eSun

PLA+HS Haze Blue High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

Tags: Esun, ePLA+HS, Speed, cheap, Filament, High, Flow, PLA, 3D printing, Printing speed, Print quality, Melting properties, Rapid, Prototyping, environmentally friendly, 1.75, Printer, 3D printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, affordable, 1.75mm, Soft, Blue