PLA+HS Matcha Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Matcha Green. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.

More colours PLA+HS:
                                                               


Recommended Accessories:


Features:

  • Made for fast printing: up to 350 mm/s, a speed rarely used in practice
  • Flows more easily than standard PLA+ at high speed
  • Good layer adhesion even at high speed, according to eSun
  • Tough, does not break easily according to eSun
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Enclosures and mounts for electronics
  • Several identical parts where print time matters
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 350 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+HS (PLA+ for high print speed)
  • Colour: Matcha Green
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 54 °C (0.45 MPa)
  • Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
  • Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
  • Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
  • Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
  • Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
  • Acid and alkali resistant: no
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+HS filament Matcha Green, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+HS Matcha Green High Speed Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 425559
  • Availability: In Stock
  • CHF16.90

  • Ex Tax: CHF15.63

Related Products

PLA Matte Matcha Green Filament 1.75mm 1Kg eSun

PLA Matte Matcha Green Filament 1.75mm 1Kg eSun

ePLA-Matte Matcha Green is a PLA-based filament from eSun. The ePLA-Matte series from eSun combines ..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Olive Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Olive Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA Magic Dark Twinkling Green Filament 1.75mm 1Kg eSun

PLA Magic Dark Twinkling Green Filament 1.75mm 1Kg eSun

Experience a magical printing experience with the ePLA-Magic Dark Twinkling Green Filament. This fil..

CHF16.90 Ex Tax: CHF15.63

ePLA-Matte Sage Green Filament 1.75mm 1Kg R3D

ePLA-Matte Sage Green Filament 1.75mm 1Kg R3D

ePLA-Matte is a PLA-based filament from R3D. The ePLA-Matte series from R3D combines the excellent p..

CHF11.90 Ex Tax: CHF11.01

PLA+ Mustard Green Filament 1.75mm 1Kg eSun

PLA+ Mustard Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Matcha Green Filament 1.75mm 1Kg eSun

PLA+ Matcha Green Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Basic Holly Green Filament 1.75mm 1Kg eSun

PLA Basic Holly Green Filament 1.75mm 1Kg eSun

With the PLA Basic Filament from eSun, you get a cost-effective yet high-quality printing material s..

CHF11.90 Ex Tax: CHF11.01

Panchroma PLA Lime Green Filament 1.75mm 1Kg

Panchroma PLA Lime Green Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..

CHF18.90 Ex Tax: CHF17.48

Panchroma PLA Olive Green Filament 1.75mm 1Kg

Panchroma PLA Olive Green Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and is suit..

CHF18.90 Ex Tax: CHF17.48

PLA+HS Mustard Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Mustard Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Holly Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Holly Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Mint Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS Mint Green High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

Tags: Esun, ePLA+HS, Speed, affordable, Filament, High, Flow, PLA, 3D-Printing, Printing Speed, Print Quality, Melt Characteristics, Rapid, Prototyping, eco-friendly, 1.75, Printer, 3D Printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, inexpensive, 1.75mm, Lilac, Lilac, Matcha, Green