PLA+HS Gray High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Grey. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.

More colours PLA+HS:
                                                               


Recommended Accessories:


Features:

  • Made for fast printing: up to 350 mm/s, a speed rarely used in practice
  • Flows more easily than standard PLA+ at high speed
  • Good layer adhesion even at high speed, according to eSun
  • Tough, does not break easily according to eSun
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Enclosures and mounts for electronics
  • Several identical parts where print time matters
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 350 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+HS (PLA+ for high print speed)
  • Colour: Grey
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 54 °C (0.45 MPa)
  • Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
  • Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
  • Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
  • Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
  • Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
  • Acid and alkali resistant: no
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+HS filament Grey, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+HS Gray High Speed Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 423212
  • Availability: In Stock
  • CHF16.90

  • Ex Tax: CHF15.63

Related Products

PLA Marble Gray Filament 1.75mm 1Kg eSun

PLA Marble Gray Filament 1.75mm 1Kg eSun

eMarble Marble Filament is a PLA-based 3D printing material with fine black pigments in the material..

CHF25.90 Ex Tax: CHF23.96

PLA Silk Silver Filament 1.75mm 1Kg eSun

PLA Silk Silver Filament 1.75mm 1Kg eSun

The eSilk-PLA silver has been specially developed to achieve particularly smooth and shiny surfaces ..

CHF16.90 Ex Tax: CHF15.63

PLA+ Grey Filament 1.75mm 1Kg eSun

PLA+ Grey Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Silver Filament 1.75mm 5Kg eSun

PLA+ Silver Filament 1.75mm 5Kg eSun

This XXL 5Kg roll of PLA Plus silver from eSun is based on a standard PLA filament. The following pr..

CHF69.90 Ex Tax: CHF64.66

PLA Matte Dark Gray Filament 1.75mm 1Kg eSun

PLA Matte Dark Gray Filament 1.75mm 1Kg eSun

The ePLA-Matte Gray is a PLA-based filament from eSun. The ePLA-Matte series from eSun combines the ..

CHF16.90 Ex Tax: CHF15.63

PLA-ST Gray Filament 1.75mm 1Kg eSun

PLA-ST Gray Filament 1.75mm 1Kg eSun

EPLA-ST grey features high toughness, impact resistance and elongation at break, making it suitable ..

CHF19.90 Ex Tax: CHF18.41

PLA Twinkling Silver Filament 1.75mm 1Kg eSun

PLA Twinkling Silver Filament 1.75mm 1Kg eSun

eTwinkling Silver is a PLA-based filament from eSun. The eTwinkling series from eSun combines the ex..

CHF15.90 Ex Tax: CHF14.71

PLA Hyper Gray Filament 1.75mm 1Kg Creality

PLA Hyper Gray Filament 1.75mm 1Kg Creality

The Creality PLA Hyper Filament enables ultra-fast printing speeds of up to 600 mm/s, significantly ..

CHF20.90 Ex Tax: CHF19.33

PLA Basic Gray Filament 1.75mm 1Kg eSun

PLA Basic Gray Filament 1.75mm 1Kg eSun

With the PLA Basic Filament from eSun, you get a cost-effective yet high-quality printing material t..

CHF11.90 Ex Tax: CHF11.01

PLA Basic Light Gray Filament 1.75mm 1Kg eSun

PLA Basic Light Gray Filament 1.75mm 1Kg eSun

With eSun's PLA Basic filament, you get a cost-effective yet high-quality printing material optimize..

CHF11.90 Ex Tax: CHF11.01

PLA Basic Grey Refill Filament 1.75mm 1Kg eSun

PLA Basic Grey Refill Filament 1.75mm 1Kg eSun

Are you looking for high-quality filament for your 3D printer that is reliable, environmentally frie..

CHF11.40 Ex Tax: CHF10.55

PolyTerra PLA Fossil Gray Filament 1.75mm 1Kg

PolyTerra PLA Fossil Gray Filament 1.75mm 1Kg

PolyTerra PLA is a very easy to print filament that provides reliable results for both beginners and..

CHF14.90 Ex Tax: CHF13.78

HT-PLA Gray Filament 1.75mm 1Kg Polymaker

HT-PLA Gray Filament 1.75mm 1Kg Polymaker

Polymaker HT-PLA is a very easy-to-print high-temperature filament that provides reliable results fo..

CHF21.90 Ex Tax: CHF20.26

Panchroma PLA Dark Gray Filament 1.75mm 1Kg

Panchroma PLA Dark Gray Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for daily use and is suit..

CHF18.90 Ex Tax: CHF17.48

Panchroma PLA Steel Gray Filament 1.75mm 1Kg

Panchroma PLA Steel Gray Filament 1.75mm 1Kg

The Panchroma Basic PLA by Polymaker is a versatile 3D printing filament for everyday use and is sui..

CHF18.90 Ex Tax: CHF17.48

Panchroma PLA Gray Filament 1.75mm 1Kg

Panchroma PLA Gray Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..

CHF18.90 Ex Tax: CHF17.48

PLA+HS Concrete Gray High Speed Filament 1.75mm 1Kg eSun

PLA+HS Concrete Gray High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

Tags: Esun, ePLA+HS, Speed, affordable, Filament, High, Flow, PLA, 3D Printing, Printing speed, Printing quality, Melting properties, Rapid, Prototyping, eco-friendly, 1.75, Printer, 3D Printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, inexpensive, 1.75mm, Silver, Grey.