PLA+HS Coral Orange High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, and according to eSun layer adhesion and dimensional accuracy stay good at that pace. Prototypes, small batches and larger models are finished much faster without the surface suffering. Like standard PLA+, it is easy to print and needs no heated enclosure. The spool holds 1 kg of 1.75 mm filament in the colour Coral Orange. It comes on a cardboard spool that goes into cardboard recycling when empty instead of the bin.

Compared with standard PLA+, PLA+HS flows more easily at high speed. For more strength, choose PLA+, which also runs well on fast printers.

More colours PLA+HS:
                                                               


Recommended Accessories:


Features:

  • Made for fast printing: up to 350 mm/s, a speed rarely used in practice
  • Flows more easily than standard PLA+ at high speed
  • Good layer adhesion even at high speed, according to eSun
  • Tough, does not break easily according to eSun
  • Holds up outdoors, but may fade over time in strong sunlight. Softens from about 54 °C
  • If a part has to withstand heat, for example in a car: HT-PLA from Polymaker or R3D
  • Cardboard spool instead of a single-use plastic spool: less waste, the empty spool goes into cardboard recycling
  • Coated edges on the cardboard spool: less abrasion, runs well in the Bambu Lab AMS and the Creality CFS
  • Vacuum-packed with desiccant

Application Examples:

  • Prototypes and functional samples
  • Enclosures and mounts for electronics
  • Several identical parts where print time matters
  • Models, figures and decoration

Documentation:


Recommended Print Settings:

  • Nozzle temperature: 220 °C (210 to 230 °C)
  • Print bed temperature: 55 °C (45 to 60 °C)
  • Print bed: PEI
  • Part cooling fan: 100 %
  • Print speed: slicer's default profile, up to 350 mm/s

Technical Data:

  • Manufacturer: eSun
  • Material: PLA+HS (PLA+ for high print speed)
  • Colour: Coral Orange
  • Filament diameter: 1.75 mm
  • Tolerance: ±0.05 mm
  • Filament weight: 1 kg
  • Density: 1.24 g/cm³
  • Melt flow index: 5.2 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 54 °C (0.45 MPa)
  • Tensile strength: 53.12 MPa (X-Y), 32 MPa (Z)
  • Elongation at break: 4.01 % (X-Y), 2.8 % (Z)
  • Flexural strength: 83 MPa (X-Y), 58.6 MPa (Z)
  • Flexural modulus: 2900 MPa (X-Y), 2680 MPa (Z)
  • Izod impact strength: 5.6 kJ/m² (X-Y), 2.41 kJ/m² (Z)
  • Acid and alkali resistant: no
  • Spool: cardboard
  • Spool outer diameter: 200 mm
  • Spool hole diameter: 55 mm
  • Spool width: 62 mm
  • Gross weight: 1303 g

Scope of Delivery:

  • 1× PLA+HS filament Coral Orange, 1.75 mm, 1 kg on cardboard spool

Write a review

Note: HTML is not translated!
    Bad           Good

PLA+HS Coral Orange High Speed Filament 1.75mm 1Kg eSun

  • Brand: eSUN
  • Product Code: 425552
  • Availability: In Stock
  • CHF16.90

  • Ex Tax: CHF15.63

Related Products

PLA+ Orange Filament 1.75mm 1Kg eSun

PLA+ Orange Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA Matte Mandarin Filament 1.75mm 1Kg eSun

PLA Matte Mandarin Filament 1.75mm 1Kg eSun

ePLA-Matte Mandarin is a PLA based filament from eSun. The ePla-Matte series from eSun combines..

CHF16.90 Ex Tax: CHF15.63

PLA+HS Orange High Speed Filament 1.75mm 1Kg eSun

PLA+HS Orange High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

PLA Hyper Orange Filament 1.75mm 1Kg Creality

PLA Hyper Orange Filament 1.75mm 1Kg Creality

The Creality PLA Hyper Filament enables ultra-fast printing speeds of up to 600 mm/s, greatly accele..

CHF17.90 Ex Tax: CHF16.56

PLA Basic Orange Filament 1.75mm 1Kg eSun

PLA Basic Orange Filament 1.75mm 1Kg eSun

With the PLA Basic Filament from eSun, you get a cost-effective yet high-quality printing material o..

CHF11.90 Ex Tax: CHF11.01

PLA+ Coral Orange Filament 1.75mm 1Kg eSun

PLA+ Coral Orange Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Apricot Orange Filament 1.75mm 1Kg eSun

PLA+ Apricot Orange Filament 1.75mm 1Kg eSun

PLA+ from eSun is an enhanced PLA filament and one of eSun's most popular materials. According to eS..

CHF14.90 Ex Tax: CHF13.78

PLA+ Coral Orange Refill Filament 1.75mm 1Kg eSun

PLA+ Coral Orange Refill Filament 1.75mm 1Kg eSun

Discover the sustainable and high-quality PLA+ Refill Filament from eSun with a 1.75mm diameter – no..

CHF13.50 Ex Tax: CHF12.49

PLA Hyper RFID Orange Filament 1.75mm 1Kg Creality

PLA Hyper RFID Orange Filament 1.75mm 1Kg Creality

With the PLA Hyper RFID Filament from Creality, you will experience 3D printing in a new dimension. ..

CHF22.90 Ex Tax: CHF21.18

PLA-UV Orange Color Change Filament 1.75mm 1Kg eSun

PLA-UV Orange Color Change Filament 1.75mm 1Kg eSun

The PLA-UV color-changing filament from eSun combines proven PLA printing properties with a fascinat..

CHF16.90 Ex Tax: CHF15.63

PolyTerra PLA Sunrise Orange Filament 1.75mm 1Kg

PolyTerra PLA Sunrise Orange Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that enables reliable results for both beginners and ..

CHF14.90 Ex Tax: CHF13.78

HT-PLA Orange Filament 1.75mm 1Kg Polymaker

HT-PLA Orange Filament 1.75mm 1Kg Polymaker

Polymaker HT-PLA is a very easy-to-print high-temperature filament that enables reliable results for..

CHF21.90 Ex Tax: CHF20.26

Panchroma PLA Orange Filament 1.75mm 1Kg

Panchroma PLA Orange Filament 1.75mm 1Kg

The Panchroma Basic PLA from Polymaker is a versatile 3D printing filament for everyday use and is s..

CHF18.90 Ex Tax: CHF17.48

PLA+HS Apricot Orange High Speed Filament 1.75mm 1Kg eSun

PLA+HS Apricot Orange High Speed Filament 1.75mm 1Kg eSun

PLA+HS from eSun is a PLA+ filament developed for high print speeds. It prints at up to 350 mm/s, an..

CHF16.90 Ex Tax: CHF15.63

Tags: Esun, ePLA+HS, Speed, affordable, Filament, High, Flow, PLA, 3D Printing, Print Speed, Print Quality, Melting Properties, Rapid, Prototyping, environmentally friendly, 1.75, Printer, 3D Printer, FDM, Plastic, ePLA-HF, ePLA-HS, PLA+, Speed, Quality, inexpensive, 1.75mm, Coral, Orange