PA-CF Nylon Carbon Fiber Filament 1.75mm 1Kg eSun

This carbon fiber-reinforced nylon filament from eSun is suitable for 3D printed parts that need to withstand high temperatures, stress, shocks, or other mechanical forces.

Conclusion: ePA-CF Nylon Carbon Fiber from Esun is only suitable for professionals and advanced users because it is not easy to 3D print. The adhesion on the print bed is also not very simple so, if it does not adhere well to the print bed, you should work with a roughly 5-10mm brim. Carbon fiber is one of the strongest and stable materials for printing and has very good toughness and impact resistance to withstand falls, shocks and breakage due to elongation.

Info: For carbon fiber materials, we recommend stainless steel or hardened nozzles that are resistant to abrasive materials. Store dry and tightly sealed! The material quickly absorbs moisture from the environment.

• Micro Swiss A2 steel nozzle coated
• Micro Swiss M2 hardened steel nozzle coated

• eBox Filament Drying Dry Box

• High strength
• Very high stiffness
• Wear-resistant
• High carbon fiber content of 20%
• Low density hence suitable for light construction
• High thermal resistance up to 160°
• High chemical resistance
• Impact resistance even at low temperatures
• Compared to nylon, it has a lower shrinkage rate and deformation
• Good flame resistance, flame retardance: UL94-V2

• Prototyping
• Model car
• Model airplane 
• Sturdy mounts
• Electronic devices
• Mechanical parts
• Automobile parts
• Pinions and gears

• Print temperature: 230-260°C. Recommended: 250°C
• Heating bed temperature: 80°C
• Fan speed: 0 to 50% Recommended: 40%
• Feed rate: 30-60mm/s (2400-3600mm/min)

• eSun Product Manual
• Filament Data Sheet

• Color: Black
• Item number: ePA-CF175N1
• EAN: 6922572247413
• Carbon fiber content: 20%
• Material: PA Nylon with carbon fibers
• Filament weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Print temperature: 230-260°C
• Heating bed temperature: 80°C
• Density: 1.24g/cm3
• Melt flow index: 6g/10min
• Impact resistance: 15.5kJ/m²
• Extension at break: 26%
• Tensile strength: 140MPa
• Dimensional stability: up to 160°C
• Spool outer diameter: 20cm
• Spool width: 6.85cm
• Inner diameter (hole): 5.3cm
• Filament weight: 1000g
• Weight empty spool: 229g
• Total weight: 1423g
• Dimensions: 205 x 215 x75mm

• 1x ePA-CF Nylon Carbon Fiber Filament 1.75mm 1Kg eSun