GPS receiver with 2m USB cable

The USB GPS receiver from DFRobot with the u-blox chip UBX-G7020-KT has the antenna in the housing and a 2 m long USB cable. According to DFRobot it fits Raspberry Pi, Jetson Nano, LattePanda or a PC. A built-in battery keeps the satellite data, so the next start is faster. The bottom is magnetic and sticks to metal, for example on a vehicle roof.

Features:

• u-blox UBX-G7020-KT with 56 channels
• Antenna in the housing, USB cable 2 m
• Built-in battery stores the satellite data for a fast start
• Magnetic bottom
• Printed on the housing: DC 3.3 V to 5.0 V, IPX6
• Guide for Windows and Raspberry Pi in the wiki of the TEL0137 (same chip)

Application Examples:

• Position and time for Raspberry Pi and mini PCs
• Tracking and navigation of vehicles
• Time stamp and position for data loggers
• GPS time as a time source

Documentation:

• Wiki DFRobot TEL0137, same chip UBX-G7020-KT, guide for Windows and Raspberry Pi

Technical Data:

• Manufacturer: DFRobot
• Manufacturer SKU: TEL0138
• Chip: u-blox UBX-G7020-KT
• Frequency: L1 1575.42 MHz (DFRobot also lists 1561.10 and 1602.00 MHz)
• Channels: 56
• Baud rate: 4800 to 115200 bit/s
• Sensitivity: tracking -162 dBm, cold start -148 dBm
• Time to fix: cold start 29 s, warm start 3 s, hot start 1 s (averages)
• Accuracy: position below 2.5 m, with SBAS below 2.0 m, time 30 ns
• Update rate: 1 Hz
• Voltage: 3.3 to 5 V DC
• Interface: USB, cable 2 m
• Operating and storage temperature: -40 to 85 °C
• Dimensions: 38 × 49 × 16 mm
• Weight: 64 g

Scope of Delivery:

• 1× GPS receiver with 2 m USB cable